• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Yippee! What the postman brought

dhal22

dhal22

GSN Sponsor Tier 1
I bought a mill rotary table (Vevor). Shockingly poorly made but oh well, high accuracy not needed in the hobby world.

IMG_0132.jpeg
IMG_0133.jpeg
 
TonyHallo

TonyHallo

150cc
What size is it? Mine is small but so is my mill. Used it once and it did the job. When the need arises you be happy you have it.
 
Snoopy1

Snoopy1

640cc Uber Pimp
TonyHallo said:
A 180 grit CBN wheel on the left and 320 grit diamond wheel on the right, about $60 on Temu. Takes about 15 minutes to coast down.View attachment 123042
Click to expand...
WoW never really seen this type of grinding wheels before very interesting. Then I watched a couple videos on the CBN wheels and got interested. Then looked the wheels up and was shocked at the price. The cheapest one could find was $200.
 
TonyHallo

TonyHallo

150cc
I paid $60 for both on Temu. Might not last long, we shall see. I put an edge on a brazed carbide bit tool with the CBN wheel before the diamond wheel arrived.
 
TonyHallo

TonyHallo

150cc
Postman been busy, brought these new contour gauges, 6" and 10" long, both have locking feature. Used them for making the cabin rear former in the Cherokee. Much nicer than the old wire version, had a few bent wires and while trying to correct the situation it fell into many pieces, pitched it and bought these on Amazon. If you need a contour gauge , you will be happy with these.

IMG_3651.jpg
 
You must log in or register to reply here.
Top