• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. TonyHallo

    Scale BUSA Super Cub

    Look at the top photo in the post above.
  2. TonyHallo

    Scale BUSA Super Cub

    Put the plane on the scales with everything installed. 35 1/2 pounds. Once the fuselage is painted looking at 39 to 40 pounds. Currently the CG is about right so it will be tail heavy once painted. Need to move some thongs around. Looked around the net and found several builds ranging 33 to...
  3. TonyHallo

    Scale BUSA Super Cub

    The boot cowl section is 5 pieces, one on the bottom, two on each side that over lap on top since the front support wires meet at the center of the plane. The full scale is split at the top as well. The Cub may be different since there is inverted from the Super Cub.
  4. TonyHallo

    What beer ya drinking tonight?

    Had a couple of 22 ounce Miller Lite drafts with pizza today.
  5. TonyHallo

    Scale BUSA Super Cub

    Running out of parts. Everything is on the fuselage, only parts left are the wing struts. Missing a knob for rear throttle quadrant.
  6. TonyHallo

    Scale BUSA Super Cub

    Got the throttle and choke linkage complete, both are pull on, spring off. Repurposed the cooling duct from the Cherokee for this install. I sent a message off to Falcon Props asking about their 3" spinner and 25" CF prop, no rely yet. Swinging a 26 x10 on the Champ, I plan to use a 25X9 here.
  7. TonyHallo

    Scale BUSA Super Cub

    Steven, Finally put the tap guide to work. Works great! Thank you again. Purchased 12L14 3/16" carbon steel hex bar from McMaster Carr. The 12L14 material drills, turns, mills and taps like butter. Took a few hours but I like the results. There are about 10 operations in each piece and I...
  8. TonyHallo

    Scale BUSA Super Cub

    The tail position light is a 8 mm 1/2 watt LED. I have the lights on a logic switch that comes true when the switch SD is up and the ignition is on.
  9. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    OK I got it. I took the easy way out and just used little DuBro hinges.
  10. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    How did you get from the photo on post #82 to the laid up cowl? The shape looks different? Epoxy or polyester resin used? Wondering about the blue tint.
  11. TonyHallo

    Scale BUSA Super Cub

    More details. The tail wires are 3/32" SS TIG wire threaded for 2-56 threads, a short piece of 1/8 tube, and 2 2-56 nuts. A plain nut is inside the clevis and scale brass nut on the end of the tube in an attempt to simulate the first photo. I might order some hex stock to make bigger hex nuts...
  12. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    OK I'm confused now, what are these hinges for?
  13. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    I say that's very good. -9 is the door lug size.
  14. TonyHallo

    Scale BUSA Super Cub

    It's been quite a while but pretty sure I used this photo.
  15. TonyHallo

    Scale BUSA Super Cub

    Completed the Poly Spray application for the time being. Decided to assemble the Cub and do a weight check. I hope to take it to our November Indiana Flyers Club meeting in November. Have the mains and tailwheel on. The tailwheel is a thing of beauty. It came from Cirrus that use to...
  16. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    I assume the pins are for the cowl? Did you locate hair pins as well?
  17. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Do you still have that Unimat lathe?
  18. TonyHallo

    Scale BUSA Super Cub

    Weather cooperated today. Tomorrow I will wet sand with 400 to remove various defects before putting on the second coat.
  19. TonyHallo

    Scale BUSA Super Cub

    Put two coats of Poly Brush on yesterday, reviewed the Stits manual before hand since it has been a long time since I used the system. The manual recommends spraying a coat in the morning and the second coat in the afternoon. Finished the first coat before lunch and second coat at 1600. The...
  20. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Now you can cover the outside with fabric, the door was the first thing I covered on the Super Cub back in December 2006!
Top