• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Notorious B.E.N.

    Electric Carden PRO

    I haven't been able to locate any.
  2. Notorious B.E.N.

    IMAC The new Dalton 300 SP / 330

    I guess my question is more if the 330 Tony and Cam are referring to are going to be low-wing or mid-wing. The Pilot 330SC is a mid-wing model and all of Tony's Extra designs are mid-wing so I'm curious if another low-wing is in the works to go with the Yak 54.
  3. Notorious B.E.N.

    Anyone Running 32:1 Redline in a DA?

    Yeah I have not seen the 40:1 for normal yet but other people have brought it up.
  4. Notorious B.E.N.

    Anyone Running 32:1 Redline in a DA?

    True but what if you going to run another brand like ZDZ? That's why I'm asking. I'm still not 100% decided but certainly leaning that way.
  5. Notorious B.E.N.

    Anyone Running 32:1 Redline in a DA?

    I may be moving to an area that doesn't have ethanol free gas so I may have to try and find some of that T4.
  6. Notorious B.E.N.

    IMAC Build: Dalton Extra 300

    Last little bit showing the method I'm using to effectively mask off the area where the pilot and dash will go. I also added some balsa to help reinforce the backplate. Unfortunately I'm headed out for work for 10 days tomorrow so it'll be some time before I get back to it.
  7. Notorious B.E.N.

    IMAC Build: Dalton Extra 300

    I've been busy at it again. I wanted to check how much the cowling rises above the hatch and it's about where I want it. I can enlarge the holes for mounting the lower cowl piece to raise it up or down. Following that, I glued some strips of 3/32" balsa to level off the tops of the 1/4" spruce...
  8. Notorious B.E.N.

    IMAC The new Dalton 300 SP / 330

    Will the 330 be a low-wing or mid -wing?
  9. Notorious B.E.N.

    IMAC The new Dalton 300 SP / 330

    Are you looking for a scheme for the 300 SP or for a 330?
  10. Notorious B.E.N.

    IMAC Build: Dalton Extra 300

    It could be possible for late in the season. I'll have to see how things go this summer. I'm already down from last year with help so if all I get to is having the control surfaces cut out and a little bit of covering on the plane by New Years I'll be happy.
  11. Notorious B.E.N.

    IMAC Build: Dalton Extra 300

    Next up for today was the 1/2" balsa to support the canopy. I'm hoping the curve is OK to save sanding filler later where the canopy meets the fiberglassed portion of the hatch.
  12. Notorious B.E.N.

    IMAC Build: Dalton Extra 300

    So far today I've got the hatch sheeting cut and sanded down but of course I managed to knock off the backplate in the process so I had to reglue it. After that, I glued together some 3/32" balsa for the cockpit floors. I'm not going to do a full length floor and just do something to sit the...
  13. Notorious B.E.N.

    Anyone Running 32:1 Redline in a DA?

    Dang! @Terryscustom, are you running 40:1 or 32:1?
  14. Notorious B.E.N.

    Anyone Running 32:1 Redline in a DA?

    From Dave's mouth!
  15. Notorious B.E.N.

    Anyone Running 32:1 Redline in a DA?

    Right but ZDZ needs 35:1 so I would have to have 2 different blends.
  16. Notorious B.E.N.

    Anyone Running 32:1 Redline in a DA?

    Still thinking about motor options for the Dalton 300 and a ZDZ 180 is on the list. If I went that route, I'd run Redline at 32:1 in the ZDZ. I'd use the same gas for my EF Edge so I'm curious if anyone has tried Redline at 32:1 in a DA.
  17. Notorious B.E.N.

    Pilot RC 107" Extra 330SC

    I'm curious to hear what you think about the DLE 170. Be sure to change out the plugs to NGK's!
  18. Notorious B.E.N.

    IMAC The new Dalton 300 SP / 330

    Excellent Cam! How much counterbalance did you end up doing?
  19. Notorious B.E.N.

    Pilot RC 107" Extra 330SC

    What motor is that?
  20. Notorious B.E.N.

    IMAC Build: Dalton Extra 300

    I was going to do this last night but since my 600N actually sold, I spent last night prepping it for shipping. Anyways, I can attest that 50:50 Ammonia:Water makes balsa very pliable. I still needed a good number of clamps to ensure a nice and straight bond though.
Top