• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Notorious B.E.N.

    Pilot RC 107" Extra 330SC

    http://www.advantagehobby.com/23297/HANU910/UltraCote-Carbon-Fiber-1-Meter/?gclid=CPKbpMzGncsCFUVhfgodBIwJbw
  2. Notorious B.E.N.

    IMAC Build: Dalton Extra 300

    Not too much to report on since I had a very busy day yesterday. I competed in a Crossfit competition. I've only been doing Crossfit since February 1st so it was pretty brutal. Anyways, I got the sheeting for the hatch partially glued on. I used poly glue as suggested and I only went to the...
  3. Notorious B.E.N.

    Electric Carden PRO

    I actually found this a while ago and thought I would post it here too. Using decent packs from Revolectrix, each set of 14S 15300 would cost $598.46 and would take around 1800 watts to charge at 2C. The estimated weight of the packs, ESC, and motor would be 16.9 lbs. The really interesting...
  4. Notorious B.E.N.

    IMAC Build: Dalton Extra 300

    I got the first part of goodies today. I think the fuel tank will be a tight fit but will work. I might have to take a little off of the stringers for the canopy hatch but it wouldn't be too much.
  5. Notorious B.E.N.

    Pilot RC 107" Extra 330SC

    $7.99 and available for 2 day shipping with Prime! http://www.amazon.com/Milescraft-1312-Drill-Block/dp/B00F1ZJFZK
  6. Notorious B.E.N.

    SOLD! BLS272SV (x3), BLS274SV, BLS256HV

    Price drop. The 256 is $85 shipped in the USA. The 272's are each $95 shipped in the USA or $265 shipped for all 3. The 274 is still $110 shipped in the USA. Or get all the servos for $425 shipped in the USA.
  7. Notorious B.E.N.

    Pilot RC 107" Extra 330SC

    Is that the 122 wing or does the 107 use 3 servos? I'm going to have to get one of those drill blocks. Probably a lot easier to get a 90 degree to the surface than trying to use a drill press.
  8. Notorious B.E.N.

    IMAC Build: Dalton Extra 300

    The only thing I worked on tonight was cutting some pieces of lite ply to increase the thickness where the blind nuts will go on the cowl. I also ordered a pilot figure today. I went with the one that has the checkered pattern on the helmet.
  9. Notorious B.E.N.

    SOLD! TREX 600N with Parts

    Price dropped to $500 shipped anywhere in the USA.
View older results
Top