• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Forgues-Research

    Scale 50% Dalotel 165

    servo control horn , when you don't have a local hobby shop and you need it right now
  2. Forgues-Research

    Scale 50% Dalotel 165

    finally got the antenna done and installed the rap around of the fin
  3. Forgues-Research

    Scale 50% Dalotel 165

    You know I have been following a lot of what your doing and you are right up there with big sized beast.
  4. Forgues-Research

    Scale 50% Dalotel 165

    man this part was hard to get right , but at least I was using Litho plate which is 0.010 in
  5. Forgues-Research

    Scale 50% Dalotel 165

    Thanks guys for all the encouragements, means a lot
  6. Forgues-Research

    Scale 50% Dalotel 165

    finish the trim paint on the elevators, and installed the trim (boost) tab also the picture on the right the under part of the elevator, is from the full size
  7. Forgues-Research

    Scale 50% Dalotel 165

    cowling done, trimming the rudder, and Litho plate came in
  8. Forgues-Research

    Scale 50% Dalotel 165

    waiting for the Litho plate, so working on the cowling
  9. Forgues-Research

    Scale 50% Dalotel 165

    started making templates out of thin plastic sheet, gab between fin and stab, I will using Litho plate from a friend that has a few large sheets
  10. Forgues-Research

    Scale 50% Dalotel 165

    while still waiting for a bunch of wires to finish the wiring, I was able to finish the tail wheel chains/spring on both side, and something no one will ever see took nearly two hours to make and install, inside the fuse, the cross rudder cables were rubbing on one of the lower bulk head, so...
  11. Forgues-Research

    Scale 50% Dalotel 165

    tail wheel chain and spring,
  12. Forgues-Research

    Scale 50% Dalotel 165

    the canopy is not in, so its starting to look like an airplane, but I have a question , if anyone can offer a suggestion, I'm all ears, the picture of the tail is what it is suppose to be but there is a covering need as you can see and it has to be removable,
  13. Forgues-Research

    Scale 50% Dalotel 165

    Hey guys, is a photo of the propellers with or without logos, the 3 blade is a 29 x 12 so you can see the size comparison and a revised price list. I can tell you, I have these in hand right now, absolutely amazing
  14. Forgues-Research

    Scale 50% Dalotel 165

    sorry for lack of posts, I'm still waiting for the new wiring to start connecting everything
  15. Forgues-Research

    Scale 50% Dalotel 165

    Up bright and early, so worked on a bit of electronics , in this case Fiber optic encoders and decoders, now waiting for the wiring to arrive
  16. Forgues-Research

    Scale 50% Dalotel 165

    not much to show for 4 hours work lol, those are skid plates for the rudder cable as was on the full size the one photo with the markings is of the full size but in bad shape
  17. Forgues-Research

    Scale 50% Dalotel 165

    I put the air tank straddling the two fuel tanks, the other photos is showing the steps , this is really a home built airplane, in miniature Man there is a lot of work but I love it and today too hot to go flying anyway , 30c with high humidity
  18. Forgues-Research

    Scale 50% Dalotel 165

    that looks awesome, should work great, I need you to work in my shop for a few weeks, then I would have a clean shop also LOL
  19. Forgues-Research

    Scale 50% Dalotel 165

    Let the assembly begin
  20. Forgues-Research

    Scale 50% Dalotel 165

    Here is my setup, but not pleased the track rod is a bit small and bends making the moving part a bit touchy, so I'm off to see if I can get a bigger setup, dam I miss those foamies LOL
Top