• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Forgues-Research

    Scale 50% Dalotel 165

    I hear you , but for me I live alone and asking neighbors is not something I like to do. I will have the same system in the trailer probably but at the field although I am getting organized to go at alone, there are tons of people who are always willing to help
  2. Forgues-Research

    Scale 50% Dalotel 165

    working on lifting system from the shop to the carrier, not that its heavy but alone is not good,
  3. Forgues-Research

    Scale 50% Dalotel 165

    http://www.rcuniverse.com/magazine/article_display.cfm?article_id=412 making large models safer
  4. Forgues-Research

    Scale 50% Dalotel 165

    Yes with the rudder and down elevator, with just down then straight forward braking, without down elevator, then rudder only will control them, also a switch to cut off the brakes for take off and flying.
  5. Forgues-Research

    Scale 50% Dalotel 165

    Back to the grind stone this morning, installed the differential brake valves from Jet Tronic
  6. Forgues-Research

    Scale 50% Dalotel 165

    using again the tiny pencil camera, I was able to look inside the carburator and get the proper direction of the servos, you got to love this camera
  7. Forgues-Research

    Scale 50% Dalotel 165

    a bit of time off to enjoy flying today
  8. Forgues-Research

    Scale 50% Dalotel 165

    sorry about earlier photos, got the wrong one but now is the one I wanted to post
  9. Forgues-Research

    Scale 50% Dalotel 165

    choke working but had to extend the choke lever to make it more precise
  10. Forgues-Research

    Scale 50% Dalotel 165

    installing the choke and throttle servos, I know not the ones I usually use but had these, and they are high voltage so its all good
  11. Forgues-Research

    Scale 50% Dalotel 165

    I'm on it thanks guys
  12. Forgues-Research

    Scale 50% Dalotel 165

    Ya I hear you, I am having my doubts about this one, so will have to look into some good proven stuff, thanks for the heads up
  13. Forgues-Research

    Scale 50% Dalotel 165

    today got the fuel lines installed through the firewall and another gromet for the electrical such as ignition wires, and two servos to be in front of the firewall, also you will notice, on the side of the airplane, its not a new spar but an adapter to be able to sit the plane done , it will...
  14. Forgues-Research

    Scale 50% Dalotel 165

    Yes Tony for sure, I will add protection
  15. Forgues-Research

    Scale 50% Dalotel 165

    rough wiring you see here will be tidied up but this is only for the two wings,
  16. Forgues-Research

    Scale 50% Dalotel 165

    started to pass some wire from the front to the middle but under the spar attach, guess what I can't see a dam thing so I used one these tiny camera with a hook
  17. Forgues-Research

    Scale 50% Dalotel 165

    Last black trim done but will need a bit fixing, no big deal, and cut out the hole where the electrical will connect from the wing to the fuse
  18. Forgues-Research

    Scale 50% Dalotel 165

    Thank you, great information,
  19. Forgues-Research

    Scale 50% Dalotel 165

    the picture with the rx, I will be mounting here temporarily, although it will go there but camouflaged. and this is getting setup for the maiden test flight around mid to end of August. so right now a lot in the wiring to keep everything invisible, not an easy task also to start installing...
Top