• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Jetpainter

    Hughes H-1 radial powered Racers (as seen in the 'Aviator')

    Nice!
  2. Jetpainter

    Hughes H-1 radial powered Racers (as seen in the 'Aviator')

    That was such a cool era for airplanes!
  3. Jetpainter

    The 'What did you do in your workshop tonight?' thread

    It's good to know all the tricks of your product.:yesss:
  4. Jetpainter

    Hughes H-1 radial powered Racers (as seen in the 'Aviator')

    Pretty cool. :yesss:
  5. Jetpainter

    GSN GIVE-A-WAY Hangar 9 35% Extra 300X Assembly

    Thanks!
  6. Jetpainter

    GSN GIVE-A-WAY Hangar 9 35% Extra 300X Assembly

    I had taken the pin out of an assembled one last night and a #53 drill fits in the hole and a #52 didn't. A #53 is .0595 so it may be .062 wire.
  7. Jetpainter

    GSN GIVE-A-WAY Hangar 9 35% Extra 300X Assembly

    Do you remember what size wire they took? I cant find the hole size in the information for them and I'd like to order some wire when I order the hinges.
  8. Jetpainter

    GSN GIVE-A-WAY Hangar 9 35% Extra 300X Assembly

    I have been thinking about the unassembled hinge points. I need to take a good look at the rudder and tail post and decide which way to go.
  9. Jetpainter

    Jase 'THE ACE' Dussia bends the 3D laws of physics

    Most of the time when I see someone fly behind a tree, he doesn't come out the other side.;)
  10. Jetpainter

    Jase 'THE ACE' Dussia bends the 3D laws of physics

    Awesome as usual!
  11. Jetpainter

    3D MOJO 65 w/20cc Build

    Your getting closer. :yesss:
  12. Jetpainter

    Lowest 200mph RC jet knife edge pass (UltraHD/4K)

    Flying it like he stole it!
  13. Jetpainter

    GSN GIVE-A-WAY Hangar 9 35% Extra 300X Assembly

    They're dual servo wiring harness is what I used. Well made, and they use some really nice wire. Here is a picture of one I grabbed off the Internet. Mine have different length wires.
  14. Jetpainter

    GSN GIVE-A-WAY Hangar 9 35% Extra 300X Assembly

    I worked on the wings more today. I used my Hitec servo programer to setup the center and end points. I may need some help from @stangflyer and @Xpress when I get a little farther and need to match them. Hangar 9 did a good job with the horns. I think the geometry will work out pretty good...
  15. Jetpainter

    Scale 50cc Scratch Build From My Own Design Revisited

    Our weather was actually pretty good this afternoon, but the afternoon was fathers day time.
  16. Jetpainter

    Scale 50cc Scratch Build From My Own Design Revisited

    Yuk!
  17. Jetpainter

    Scale 50cc Scratch Build From My Own Design Revisited

    My picture isn't as pretty. Looks like the maiden is going to have to wait AGAIN! Here is a screen capture from our weather station at the field. I've flown a total of two flights all year. So far it sure hasn't been worth all of the aggravation.
  18. Jetpainter

    Scale 50cc Scratch Build From My Own Design Revisited

    I may take it out in the morning. The weather should be okay, I'll have to check again in the morning, but the forecast isn't bad. Hopefully they'll be someone at the field since my main partner in crime that I've been flying with for decades is out of town and failed to tell me he wasn't...
  19. Jetpainter

    GSN GIVE-A-WAY Hangar 9 35% Extra 300X Assembly

    I actually made some forward progress. I started by going to my shop today and unpacking my original the hatch and rudder that I had ready to go back to Horizon. I brought them home and tried the old hatch with the new cowl. Believe it or not it actually fits! My original hatch is WAY nicer than...
  20. Jetpainter

    GSN GIVE-A-WAY Hangar 9 35% Extra 300X Assembly

    I've looked at the new hatch they sent me quite a bit and I'm have a hard time figuring out how you could make it look this bad. It's laser cut formers with stringers and then balsa sheeting. From the bottom it looks great, but somehow they managed to turn the top into a wavy, dented, gouged up...
Top