• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Forgues-Research

    Scale 50% Dalotel 165

    cut the stab/elevator apart, and working on the hinges, , plus stab sheeting is all cut should get this done by Friday, will show a novel way to keep down the sheeting while the glue sets, and no , not the cat litter LOL
  2. Forgues-Research

    Scale 50% Dalotel 165

    another interesting alternative, thanks guys really appreciate all the good advice
  3. Forgues-Research

    Scale 50% Dalotel 165

    interesting observation, I can easily get gasoline without ethanol here in New Brunswick
  4. Forgues-Research

    Scale 50% Dalotel 165

    yes I was leaning towards doing this also, tell me the Tygon you use , which is what I use also, does it harden a lot, mine does. and of course the worry is for the clunk in the tank
  5. Forgues-Research

    Scale 50% Dalotel 165

    Great minds think alike, I was thinking the same ,
  6. Forgues-Research

    IMAC 40% laser 200

    Please send me your email address to aerografixs@hotmail.com
  7. Forgues-Research

    IMAC 40% laser 200

    It will be paypal, but lets wait to make sure it works for you first, if all OK then you can pay me
  8. Forgues-Research

    IMAC 40% laser 200

    I am picking them up today. I saw my other guy and he will do both sheets for the price of one which is about $11
  9. Forgues-Research

    Scale 50% Dalotel 165

    fitted the 38 X 18 propeller, might have to go to a smaller one, and mounted partially the stab, but still need to make the front of the stab adjustable , since I need a stab incidence of about 1.5 degrees positive, but not sure exactly how much.
  10. Forgues-Research

    Scale 50% Dalotel 165

    good option , will look into it
  11. Forgues-Research

    IMAC 40% laser 200

    I will have both sheets scanned, since the fin/rudder is on one sheet and the stab/elevator is on the other, I will go back but this time will see my usual guy, he normally gives me a good price, will let you know
  12. Forgues-Research

    IMAC 40% laser 200

    I have the drawing, but when I went to have it scanned for you, they were asking $10, I'm willing to do it if you are willing to pay for it
  13. Forgues-Research

    Scale 50% Dalotel 165

    Yes the 300 has twin carbs, but what if simply two gas line with one tank, what do you think?
  14. Forgues-Research

    Scale 50% Dalotel 165

    while waiting for some glue to dry, I started toying with the rear instrument panel I still need to find French instruments since this is a French airplane
  15. Forgues-Research

    Scale 50% Dalotel 165

    you bring out a good point, I will have to rethink this, thanks for the heads up
  16. Forgues-Research

    Scale 50% Dalotel 165

    You think so, How much in your opinion, this for a 300 cc 4 cylinder
  17. Forgues-Research

    Scale 50% Dalotel 165

    and its a 50 oz tank
  18. Forgues-Research

    IMAC 40% laser 200

    I have a set of Jack Strickland (RIP) plans of the 40% laser , let me check if I can find what your looking for
  19. Forgues-Research

    Scale 50% Dalotel 165

    I added the top front reinforcement, ,and started to fiberglass will need to do the underside, also added the rear plywood bars to bolt the stab onto it.
  20. Forgues-Research

    Scale 50% Dalotel 165

    finally finished installing the fin, (removable). now working on the stab, also removable. and at the same time I felt a bit more reinforcing on the front top of the fuse just aft of the firewall, so working on that also, I will post pictures later
Top