• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Enterprise

    The 3DRCForums -Discuss Anything Thread-

    Strange. I just ordered some random small stuff and I think I got a sticker. I know I have a bunch as well. I have a entire shelf in a cabinet of random decals I have gotten over the years.
  2. Enterprise

    Sugesstions for a 60" EF 3D plane

    If you went down to a 1" position and only expect maybe 30 degrees of throw, then yes they do work. PM me and I will ship you mine for cheap.
  3. Enterprise

    Extreme Flight 76/83" MXS

    They go into the tensioner clockwise, just when I am at the field, cursing at the slack cables, with two tools trying to get into a tiny space on my knees I seem to forget. They are a wonderful product in my bigger planes.
  4. Enterprise

    Sugesstions for a 60" EF 3D plane

    I have 2 of those servo I bought for a Pilot-RC Yak I tried to do on the cheap and they did not hold up well in my servo testing. They are probably good for 100 oz-in, but I would not expect any more out of them. I had them on elevator halves and as I am a pitch authority junkie, they were...
  5. Enterprise

    Extreme Flight 76/83" MXS

    On my one plane that has a removable rudder I did a push pull so I have to remove a M3 bolt and pull the wire out. I have actually gone back to normal pull pull setups as the tensioners sometimes drive me crazy with nut and figuring out which way to turn them and getting a tool in there. I...
  6. Enterprise

    The 3DRCForums -Discuss Anything Thread-

    It is no so much the hair burning as it is the leaks it can cause in the mask seal. Maybe when I retire.
  7. Enterprise

    The 3DRCForums -Discuss Anything Thread-

    I am not allowed to have a beard. Fire hazard with the 100% oxygen masks and a very small confined space with 100s of switches, dials, screens, and miles of wiring. Mustache is as good as it gets. I tried once and after a few weeks of just long stubble I gave up.
  8. Enterprise

    Sugesstions for a 60" EF 3D plane

    Listening to some of the things you are saying I might consider selling the Sebart and just getting the Vyper going and save the money for a 30cc next season. The Vyper is good at precision flying and mild 3D. Having owned so many planes, There is not much else that flies as good as 3DHS and...
  9. Enterprise

    Extreme Flight 76/83" MXS

    I am using 7954s at the 1.5" position. I like the maxed out throw for hovering. With my usual setups I sometimes get better roll rate on mid rates at speed. I read once that anything over 38 degrees is just drag and deflective force. For measuring throws I have a few of the the AJ meters...
  10. Enterprise

    Sugesstions for a 60" EF 3D plane

    I would get the 155A as it is only a few bucks more, 5 grams heavier, and in stock. If my Jeti/Mezon experiment goes well I will sell you mine as it literally has only had bullets soldered onto it. That is a low profile servo. I don't think there is a XQ, but here is the Hitec...
  11. Enterprise

    Joe Smith quits 3DHS!

    I saw the EPP bigfoot 2 years ago. I guess they did not get that one flying right.
  12. Enterprise

    Sugesstions for a 60" EF 3D plane

    Getting one of these below 1k would be a challenge. I assume you have 6s 3300s or something like that so a 12s HV setup would be more budget friendly. 4330-195 or 206 would be the choice and that is a little over $200 and the airframe will be $440 shipped or something like that. You are close...
  13. Enterprise

    Joe Smith quits 3DHS!

    The EF boxes are longer than the other brands, hence where the dimensional weight comes in. Hangar 9 designs their bigger planes in multiple boxes to save on shipping weight. If EF separated the cowling it might be a little less expensive as it won't trigger the dimensional weight. We use the...
  14. Enterprise

    Extreme Flight 76/83" MXS

    The plane has not shipped yet so I can wait a few days till you get them listed.
  15. Enterprise

    Sugesstions for a 60" EF 3D plane

    In the end bigger flies better. What you are asking for is the very definition of the EF 78 Extra. Still fits in the car and flies like a 50cc. I know that plane gets expensive to ship. The EF 70 Extra EXP might be a good fit for you. It flies clean lines and is $390 and can be built around...
  16. Enterprise

    Extreme Flight 76/83" MXS

    I use some V2s. When my 110 yak horns ripped out for the 3rd time it took one of the 2270s out of the pocket. Servo ended up burning out, but not a thing on the arm. If it takes that abuse I can't see any normal thing hurting the V2s. I have a bunch of V1s and I have replaced all the short...
  17. Enterprise

    Joe Smith quits 3DHS!

    $479. $459 for the new laser.
  18. Enterprise

    Extreme Flight 76/83" MXS

    I run 2x 2s 1300 in my 78 extra I just know I will recharge after 4 flights, which I rarely get in on a day anyways.
  19. Enterprise

    Extreme Flight 74" Laser

    They must have been hiding them or just did not have them at the tent. I went by there a number of times. I left Wednesday due to the rain kicking us out of our camp spot and I never got to talk to Chris more than a minute. If I saw a 91, I probably would have bought it.
  20. Enterprise

    Extreme Flight 76/83" MXS

    The ES pipe is very light. 4 ounces or so. You will be a little lighter, but not much.
Top