• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Bunky.F.Knuckle

    So here is the deal... SleepyC style.

    I ain't gots much of a publik sckewl edukashun.............
  2. Bunky.F.Knuckle

    ATT U-Verse, Internet Service

    I can't say either or...... Can't get U-Verse in my area. But I get AT&T cell service real good.
  3. Bunky.F.Knuckle

    MVVS 116

    For the price that both Limitless and Chief are selling them at...... Almost seems like a no brainer......... Will wait til the new year and decide then... Funds are dwindeling rapid right now.......
  4. Bunky.F.Knuckle

    Wanted JR 8611a

    Need a JR 8611a for a throttle servo. It has to work, but it can have stripped gears, a cut lead, broken gear case etc.....
  5. Bunky.F.Knuckle

    Dalton 300 non MEL

    Got a place or 2 to clean up. But all in all, I'm pretty happy with it. I'm going to have to stop work on this, since I'm still waiting for the new rear canopy former. I keep breaking glue joints on the stringers of the hatch. Broke 2 glue joints just in sanding the forward and aft edges...
  6. Bunky.F.Knuckle

    3D Another project from Bunky!

    Going thru some servos and binding a Rx. Found none of the servos I have as spare work. I'd like to find an 8611a for cheap. That way, the other 6 8611a's and the Hitec 7990 ME servos can be used on HV. Don't say that the 8611a's are not HV. Been using them on HV for years without issue. A...
  7. Bunky.F.Knuckle

    3D Demystifying Vacuum Bagging of foam wings!!

    Nope. You covered them all. Atleast all that I know of, outside of using a long straight edge and a hobby knife.....
  8. Bunky.F.Knuckle

    3D Demystifying Vacuum Bagging of foam wings!!

    I remember when we used to use "Southern Sorguhms" to sheet wings with..... It was much like contact paper. Once you touch it to the foam core, that was it. No picking up and moving around. @Kitman knows about Sorghums.
  9. Bunky.F.Knuckle

    3D Another project from Bunky!

    Remaiden day in 2012. 2 months before Joe Nall! Then I dipped the tip at Nall, with a shotty running BME 116.
  10. Bunky.F.Knuckle

    3D Another project from Bunky!

    It is!
  11. Bunky.F.Knuckle

    3D Another project from Bunky!

    I don't think it is great, but its ok. The previous rebuild was much better than this one. Even had the killer paint job on the cowl. But I think this one will not have the tear away sky scheme painted on it, unless someone would like to take that on, once I get the white base and some Red to...
  12. Bunky.F.Knuckle

    Dalton 300 non MEL

    Started by removing the tape holding the seams. Then a little 220 grit sand paper on a hand sander, cleans up the ridges, if any and removes some loose balsa hairs. My found big bottle of wood glue. Also an acid brush. A little wood glue kinda goes along way, sorta.... But once I started...
  13. Bunky.F.Knuckle

    3D Another project from Bunky!

    Power will be a 2004 model 3W 106 TOC twin spark!! It'll have a pair of 6V RCExl ignitions on it for spark. I just got the engine today, and decided that this would go on this airplane. So, I had the firewall marked via the plans. Knocked 4 holes in the firewall and installed the blind nuts...
  14. Bunky.F.Knuckle

    3D Another project from Bunky!

    Gots no idea. Originally, it was 28#. I don't plan on flying it alot, but when I fly it, it is fun! Old school 3D!!
  15. Bunky.F.Knuckle

    3D Another project from Bunky!

    Fresh new wood.
View older results
Top