• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. AKNick

    The 'What did you do in your workshop tonight?' thread

    Feels great to get a project like that done! I have three projects coming to a close, pretty excited to get that monkey off my back and fly them around! I love building.... but I love flying... It's a vicious circle!
  2. AKNick

    110" TIMBER Assembly Thread

    I used an aftermarket arm from VVRC. It gets tight in there with the choke and the throttle - no doubt. glad you figured it out.
  3. AKNick

    Yippee! What the postman brought

    Finally a dream come true. A real 1.5m DLG Flitz2, Oleg on R C Groups gave me a deal on his last one in stock that I couldn’t pass up. Also found put that he designed the Falcon DLG...pretty neat! @BalsaDust I’m joining you in the Flitz club! I’m going to call this one captain America! here...
  4. AKNick

    110" TIMBER Assembly Thread

    Got out and flew the timber after my counter balance repair. Flies great still! I’ve been trying to get my flying buddies to take the controls and fly circles, but they are too scared to fly something so big... I put in a tiny bit of flaps, and 1/4 throttle and showed him I was flying with just...
  5. AKNick

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    Flat black painted on the cowl. Final paint job done... (other than the floats). Feels good! It still has to dry//fully cure.
  6. AKNick

    Yippee! What the postman brought

    Way cool stuff right there.
  7. AKNick

    3D MOJO 65 w/20cc Build

    You're Welcome!!
  8. AKNick

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    Flat black painted on the canopy.
  9. AKNick

    3D MOJO 65 w/20cc Build

    Microsoft Word - Mojo 65 Build Instructions (laser-design-services.com) http://www.laser-design-services.com/mojo%2065%20build%20instructions.pdf
  10. AKNick

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    Decided where to put my tech aero. Under the right front seat. Made a relief exit hole in the front and a hole in the floorboard to run the wire underneath to the Rx. Made relief cutouts for the elevator and rudder clevises. I’ve been clear coating the cowling, ended up with a bad run on my...
  11. AKNick

    I'm going/went flying 2021 thread

    I wouldn't trust that servo anymore! Sounds like its not even getting power! I would remove it. You could check the connector crimps, and take the servo apart to look over the internal wiring. Sounds like you've isolated it well and ruled out everything else.
  12. AKNick

    110" TIMBER Assembly Thread

    Looks nice! I wouldn't worry about weight in the tail. I have 6oz of weight in the tail as it is.
  13. AKNick

    I'm going/went flying 2021 thread

    Does this happen only after a first flight? Where is the servo mounted? Is it getting too hot (eg; exhaust muffler)? Can you hear the servo - like if you were to try and move it by hand is it locked? If it was an electrical issue I wouldn't think it would reveal itself like you are talking...
  14. AKNick

    The 'What did you do in your workshop tonight?' thread

    Made a video about the tapered tire tool... I just watched it... and realized at the end I helped Somone not Someone. My editor doesn't have spell check LOL!! But hey! Maybe the someone it helps is names Somone!
  15. AKNick

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    I have some old stock from K&S, but not sure where one would buy it today. For my Otter (I know I know, It's not done yet either) I made some music wire struts and was planning on designing and 3D Printing struts that will snap/glue onto the wire.
  16. AKNick

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    I’ve been following David’s work designing and building the prototypes. He anticipates selling them this fall. Boy do they look great. I think I read the kit price for the beaver was going to be around $175 - which includes the struts. The floats are scale, so I’m curious to see how they...
  17. AKNick

    110" TIMBER Assembly Thread

    Thanks guys! @WMcNabb Enough time to grind your beans, boil water, French press, and enjoy a full cup LOL! @Snoopy1 Thank you! I've watched it so many times editing I was starting to get numb! But YES, that little wheel is getting a whoopin! I'm surprised the plastic hasn't broken, and the...
  18. AKNick

    110" TIMBER Assembly Thread

    Video! that only took 30hours to process in 2.7k.... enjoy!
  19. AKNick

    Scale 20cc DHC-2 "Beaver" Kit Build from Moustache Model Works

    Little details. Painted the light blue stripe on the cowling. Going to let that cure, then add some clear coat. Final step being the flat black on top.
  20. AKNick

    110" TIMBER Assembly Thread

    Started uploading my video last night, apparently it takes over 12hrs to upload 1.2Gigs of 2.7k (16min of footage) at my wifi speeds... Should probably figure out how to plug in a Ethernet cable from my router... that's just ridiculous. needless to say it was still uploading the HD version when...
Top