• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. 49dimes

    Peak Models 32% Extra 330 SC

    Just thinking everyone NEEDS a good laugh now and then :laughing:. You know my DAA meetings have given me hope!
  2. 49dimes

    Peak Models 32% Extra 330 SC

    :big_yes::way_to_go:.
  3. 49dimes

    BlueBird HB 50B servos

    On the ground after I flew it three times! Thought it might have been a boner servo but I plugged 3 other new servos in the six slot and they did the same thing in the shop. Got my trusty Fluke and found it was a receiver signal voltage issue on port 6 only. Best with your new 120 and "again"...
  4. 49dimes

    Peak Models 32% Extra 330 SC

    What!?........I'm not known for superlative skills of PURPLE!?......Dubious sessions of heaping the purple to balled up wads of wizardry!?......Copious amounts of purple pointing precision that make the common burger so PLAIN!? BWHAAAAHAHAHAHAHAHAHAHAHAHA!
  5. 49dimes

    Peak Models 32% Extra 330 SC

    :ghost:Not only was the old receiver faulty but the older 6014FS receivers where known by Futaba to have lower signal voltage than "standard". It was mainly because of the new generation chipset at that time the 6014FS was fitted with. I posted in @Bunky.F.Knuckle servo thread about the same...
  6. 49dimes

    Peak Models 32% Extra 330 SC

    And they thought Whimpy was a wimp......ROTFLMAO:roflmao:. I'll gladly shoot you today for a cheeseburger today :cautious:.
  7. 49dimes

    Peak Models 32% Extra 330 SC

    DONE! lol
  8. 49dimes

    BlueBird HB 50B servos

    Just a "heads up". This is probably more related to Futaba users but I imagine some others as well. I had the signal voltage on port/channel 6 drop to below 3 volts on an older 6014FS and the H50B that was plugged in freaked out and operated very erratic. I swapped to a newer 6014HS and operated...
  9. 49dimes

    Peak Models 32% Extra 330 SC

    Just an update.......I started having problems with the R6014FS channel 6 port and the H 50 B servo that was plugged in to it. The servo would respond erratically. For some reason the signal voltage fell to about 3 volts so I swapped it out for the R6014HS. Got right at 4 volts signal voltage...
  10. 49dimes

    BlueBird HB 50B servos

    Hope you get all of your flight control surfaces operating with the 50B. The difference is amazing. My 32% 330sc was a bit sluggish with the 3114's but got the job done nicely. The 50B's get the job done period. I'm liking the "right now" response. If your hand begins to shake the plane is going...
  11. 49dimes

    Turnigy TGY-i10 full telemetry 10 ch computer radio

    Just an update......Now that I have re installed the original firmware.....Got the Aura 8 to work with this radio in the QQ 300! Using iA6 "park flyer" receiver in the AFHDS 2A (one way) mode. I Have another Aura 8 as a stand alone and will hook it up with the 10 channel iA10 receiver in the...
  12. 49dimes

    Jtec Radiowave at Joe Nall

    Thank You. Almost could say twin brother:big_yes:?
  13. 49dimes

    Jtec Radiowave at Joe Nall

    The plane with the Thunder Bird scheme........G-202??? Every plane looks awesome. Nice pics!
  14. 49dimes

    The I'm NOT going out flying thread.

    Are you sure??? I have heard several snow birds complain of the hot humid weather down here. They typically go back home during the summer .
  15. 49dimes

    The I'm NOT going out flying thread.

    As I type this (4:30 pm CST) it is 85 degrees and 88% humidity. Feels like 90 outside or better. I think summer is going to be miserably hot and humid as usual here :thumbsdown:.
  16. 49dimes

    The I'm NOT going out flying thread.

    Now how am I supposed to "like" that???:laughing:.
  17. 49dimes

    Turnigy TGY-i10 full telemetry 10 ch computer radio

    Just a tid bit more info about the i10. Fly Sky (Not FrSky) also sells this radio as the FS-i10. Hobby Partz has it listed for 240.00. It is an AFHSD 2A system with telemetry. Receivers are hard to come by but I did get the 6 channel park flyer receiver for 9.00 and bound it to the i10. Here's...
  18. 49dimes

    The I'm NOT going out flying thread.

    And RAIN. I just knew this was going to be a soggy spring. And spring lasted a whole 2 days. Now it's just raining and humid. Boy...can't wait for the hot to get here:rolleyes:.
  19. 49dimes

    3D Newb, what's first?

    Bart.....It was a small home made (blue builders foam) 200 watt electric that I practiced and practiced hovering with. Made a replica of it with RF 3.5 and flew it that way too. I finally got good enough that I could actually hold the real electric against the side of a building while hovering...
View older results
Top