• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. 49dimes

    Pilot RC 122" Extra 330SC

    Purple is good:D. I'm sure you can find or make appropriate length rods for the ball links. Start with the inboard servos at the outer most hole and the outboard servos at a lower hole placement. This should help with angular offset placement of the respective servos. That is what EF does at the...
  2. 49dimes

    Peak Models 32% Extra 330 SC

    @ghoffman Can you make me a set of your baffles for this cowling if I give you the general rectangular dimensions of the openings and distance of L&R cylinders?
  3. 49dimes

    MKS 777

    Here is the what I have heard and know......The 777's 25 tooth like Futaba. This I know cuz I have used them. I have heard the x6 series is also 25 tooth. The HBL 380 and x8 series stands alone with its own special spline and larger diameter (even though they have a 25 tooth spline) That is...
  4. 49dimes

    Peak Models 32% Extra 330 SC

    Well...I think I have the engine installation all complete and to my liking with the exception of baffles. Will trim the excess HT RTV once it dries (less messy). I added a support to the muffler (I use this term loosely at the moment )because I could get it to move up and down a bit when bolted...
  5. 49dimes

    EF Edge 74"

    Looking great! And wow it's almost ready to fly! From box to done in no time! I was hoping to put a 4 stroke in one but I happen to have a DLE 40. Looks like the cowl has enough room even for it with its straight plug configuration.
  6. 49dimes

    Sport Restoring The Laser

    Just wanted some feedback how this engine handles is all. I used to operate 3 dubs. Have had several over the years. Very good engines.
  7. 49dimes

    Peak Models 32% Extra 330 SC

    At first Mike the weight was a concern but compared to a non cased lipo of same capacity it is only about three quarters an ounce heavier. My main reason is the way I am going to mount it!:sneaky:. Just going to have to wait and find out:big-grin:.
  8. 49dimes

    Peak Models 32% Extra 330 SC

    I'm getting anxious too! Got some neat electrical connector mounts (for the XT60's) and a hard case 4200 mah lipo coming for it. Should be here Thursday. The battery will be mounted in the pipe tunnel and feed two connector mounts. One for the receiver/switch and one for the ignition control...
  9. 49dimes

    EF Edge 74"

    Very unique construction. Usually the motor box "carriage" frame work carries the wing tube. Interesting. Looks like solid construction typical of EF. And the bevels on the elevators "LIKE". The ones on my Peak Models "SUCK".
  10. 49dimes

    Peak Models 32% Extra 330 SC

    Plane is not designed to break the "sound" barrier....or is it???
  11. 49dimes

    New project I've been working on

    Where do you get the time!? You are a busy fella. So you know...I bought a cheap Hex-copter to see what all the rage is about.
  12. 49dimes

    Peak Models 32% Extra 330 SC

    Did any one notice the :dancing-poop:??? :oops:. Bad Dog! But I love the awnry cuss. He likes to dump in my shop!.....Guess he thinks my assembly is not worth a :steamer: (Nall Contribution!). Got the cowl mount "squared" away. Stock 3mm screws at the top 6-32 on the bottomo_O.
  13. 49dimes

    The I'm going out flying thread 2016

    SWEET! :too-cool: guy! Glad you had great one.
  14. 49dimes

    The I'm going out flying thread 2016

    :I_agree::):(:cryin:
  15. 49dimes

    Peak Models 32% Extra 330 SC

    This is Theodore or aka "The Tedster" aka "Teddy". He is seven years old now. Here is a pick when he was barely a year old... Here is one of him today...... Now the surprise he left me in the shop looks like it came from a much larger dog! That's it!! No more burgers for him! lol
  16. 49dimes

    Peak Models 32% Extra 330 SC

    Just a couple of pics with the cowl on to show how much room is inside for the DA70. with the plug caps on the right cylinder has about 5/8" clearance and the left about 1/2"
  17. 49dimes

    Peak Models 32% Extra 330 SC

    OKayeeee.......... It's in.
  18. 49dimes

    Sport Restoring The Laser

    Ok the Governor has granted a "pardon" to you guys.......I can't find the thread??? Like it was never there????? Oh well:oops:.
  19. 49dimes

    The I'm going out flying thread 2016

    Well.......I think I might just go get a dose of "nitro" at the FOG field today. Just going to go watch and render. Beats sitting behind a desk at work today! lol And at times it can get exciting!
  20. 49dimes

    Sport Restoring The Laser

    Sorry David. Not trying to "dirty up" this thread. You might actually have a great boss. o_O IMO great choice to use the red head 55CS;). I had started a thread about the 3dub 70 in the engine forum and to my surprise very little posts. Now I find out YOU and ROB been holding out! tisk tisk...
Top