• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. 49dimes

    Peak Models 32% Extra 330 SC

    Going to put the gas tank vent just behind the pipe tunnel. It will look like a pissing cow girl with her boots still on! I have this "dot" actually that has been in the drawer for about 4 years.......what the hell???......right???
  2. 49dimes

    Peak Models 32% Extra 330 SC

    With the exception of the " muffler/mufflers???" everything under the hood is looking good. Will make up some bottom cowl mounting brackets . Pipe tunnel and motor box "closed up" and will start looking at the baffling.
  3. 49dimes

    Sport Little something different.....

    :eek:You mean you got rid of MultiRotorForums.com??? You Da MAN!:devil-dance: I kid I kid.....:laughing:.
  4. 49dimes

    Sport Restoring The Laser

    Boss's who make you work weekends........
  5. 49dimes

    Peak Models 32% Extra 330 SC

    Ok the "remote" choke lever is complete! Works like a charm and is smooth..... no binding. Made the finger hold to "mimic" a petot tube.
  6. 49dimes

    Peak Models 32% Extra 330 SC

    Thanks David. Yea the phone camera sucks!
  7. 49dimes

    The I'm going out flying thread 2016

    Get some rest be safe and have fun! Tell Terry and Donnie "Hi" for me if you see um! Maybe @thelaw will get some pics!
  8. 49dimes

    Peak Models 32% Extra 330 SC

    Absolutely Not! No wonder it was "free":laughing:. Now I got to get to my friends shop and get the Oxy Accet burning so I can NASCAR that DA 70:D. The 2 n 1 clears everything pretty well. Need to make a different way to attach the bottom of the cowl too.......the way the factory does it is...
  9. 49dimes

    Peak Models 32% Extra 330 SC

    Almost have the "remote" choke lever completed. Will exit the fuse just below and in front of the right wing.
  10. 49dimes

    The I'm going out flying thread 2016

    I should have been posting in the "workshop" thread:oops:. Really:on_the_go: gusting wind and it has been that way all week:(. Hope it is better for all those that have made the trip to H.O.W. Pretty quiet here:blank:.
  11. 49dimes

    Peak Models 32% Extra 330 SC

    Well just got back from going "you know" and did not fly because the wind is really gusting down here. So here is some work I got done earlier today!.....The gas tank had an air leak in the "fill / drain" fitting. I sealed it up with thin CA and seems fine now. Got it all plumbed up.
  12. 49dimes

    The I'm going out flying thread 2016

    Got to pump electrons into it before I can pump gas into it. Going out this after noon:).
  13. 49dimes

    Sport Restoring The Laser

    Just FWIW.........I have flown Derek's Lazer a few times and it is really better suited for awesome tumbles and some prop hanging/torque rolls. Takes off and lands like a dream. The DLE 55RA in it is quite spirited but if you go for the 3dub70 your going to be flying an engine:). My thoughts are...
  14. 49dimes

    Peak Models 32% Extra 330 SC

    Thanks for the compliment Rob. I would not go that far:D but I do like a Neat lay out of things. I believe it greatly enhances longevity and helps prevent possible issues but issues can arise no matter what. Got the throttle servo installed and throttle settings set in the 14SG.
  15. 49dimes

    DA service

    I must say......USPS is one part of the Government I like since we don't hear about "going postal" any longer.
  16. 49dimes

    Peak Models 32% Extra 330 SC

    Actually Rob there is a Pitts S-2 that runs open headers on his Lycoming and believe it or not it is more quiet then the private jets that fly over! My house is approximately 1/2 mile away at the end of the Fairhope Airport runway! Got the Ignition Unit all installed and "tidy". Since I used...
  17. 49dimes

    Peak Models 32% Extra 330 SC

    Got the four 6-32 holes drilled and tapped and then CA'd. will keep the "lid" on nicely. I have decided to just make a custom muffler out of the 2 n 1 header. Should be no louder than in cowls with the baffles I will make for it. Just have to see how it will do when the time comes.
  18. 49dimes

    Pilot RC 122" Extra 330SC

    Come on guys....Baking soda and CA! :mario-banana:. @witchfingers had a good idea for wheels.... I will "politely" observe this thread from now on.....Promise;).
  19. 49dimes

    Sport Restoring The Laser

    Slow???........I wrote the book on slow.....Most ARF's are 20 hours to completion. Me....No less than 20 Months.But here is a scheme you may want to consider??? This is a scratch built based on the Bob Godfrey Lazer....My buddy Derrek built it. Yes he was slow building it too lol.
  20. 49dimes

    Hey Guys,,, Rod here, from Reno

    WELCOME Rod from Reno! Evil Space Walker is AWESOME!!!! I give a "5" Double Cheeseburger rating :way_to_go:
Top