• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Patto

    Aurora 9X strange issue

    My issue persists on other models. I found that I can move the stick slowly or quickly to its max and end up with different end points according to the monitor. I've also found that my ailerons need to be retrimmed from time to time, and I can see before I take off that the left aileron is out...
  2. Patto

    Aurora 9X strange issue

    Nor have I. Planning on trying this as soon as I can.
  3. Patto

    Aurora 9X strange issue

    Will do. I sent them an email already.
  4. Patto

    Aurora 9X strange issue

    Hey all, My Aurora is doing something strange and I thought maybe someone here could tell me if there is an easy fix, (other than sending it in). About 1/3-1/2 of the time, when I push to full down elevator, the servos go immediately to about 95% of the distance and then go slow for the...
  5. Patto

    3DHS Yak 55 91" - vibration issue

    So, I put diagonal hardwood sticks along the top of the fuse below the canopy/hatch, and I used large tri-stock around the engine box and then in the canister tunnel. Boom. The shakes are at a normal level now. Wish I had done that months ago.
  6. Patto

    3DHS Yak 55 91" - vibration issue

    No one else has this specific yak. I've owned and seen plenty of similar planes but this is a first for me. This past weekend it broke the choke push rod off the DLE55. That makes me think the problem may be in the nose. I've inspected the fuse as much as I can without tearing off covering...
  7. Patto

    3DHS Yak 55 91" - vibration issue

    Yes, props are balanced, and I've tried a few different ones. The vibration is visible in the whole tail, but you can see the horizontal stab outermost leading edges moving fore/aft. It's mostly evident at low throttle. It's the entire tail, not just the control surfaces. The servos are...
  8. Patto

    3DHS Yak 55 91" - vibration issue

    The shakes are less intense with the DLE 55, but they are still present.
  9. Patto

    3DHS Yak 55 91" - vibration issue

    I bought one of these air frames last year and had a bunch of issues with vibration. Engine was a DA 60. Had a lot of issues getting it tuned properly. Sent it back to DA, they sent it back to me, vibration still an issue. I tried different props, retarding the timing, leaning the low end...
  10. Patto

    2015 3DBash Series!!!

    I'll be there Thursday. We'll get some flying in before the crowds arrive.
  11. Patto

    Xfc 2015!!!

    Too bad Higher Plane is gone and won't be covering this event! I always enjoyed their videos. Is there anyone else out there making R/C movies anymore?
  12. Patto

    Eugene, Oregon Monster Fest/3DBASH August 21st-23rd 2015!!

    Hmm... Might there be some fantastic prizes coming in?
  13. Patto

    Eugene, Oregon Monster Fest/3DBASH August 21st-23rd 2015!!

    This will be the best Monster Fest yet. Dare I say the best event in the Northwest for 2015? Oh yes, I'm saying it... Maybe even the premier Giant Scale 3D event for the west coast...
  14. Patto

    Sport Plane

    We have three of the Assassin flying wings from Crash Test Hobbies. They fly decently and are pretty durable. They cost about $90 each for everything minus the Rx. They're a kit but pretty easy to put together and easy to repair.
  15. Patto

    Scale 50% Dalotel 165

    That was very much worth reading.  Very cool!!  
  16. Patto

    Joe Smith LEAVES 3DHS!! WOAH!

    Honestly, this is the most frustrating thing about 3DHS.  They won't answer the phone, won't return emails, etc.  If I were a sponsored pilot, I'd want to associate with a company that had good customer service.
  17. Patto

    Scale 50% Dalotel 165

    I am as well.  I'm just glad I was able to find this thread again.  It's one of the two subscriptions I really cared about!!
  18. Patto

    Scale 50% Dalotel 165

    Hope you had a good day flying.  I also hope the new site format doesn't inhibit your build thread!!
  19. Patto

    Video

    Awesome!!
  20. Patto

    3D MX2 or G202

    Now THAT is funny
Top