• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Aaeolien

    3DHS Planes Picture Thread

    Pretty sure I could get another 1 or 2 in there. Front passenger seat is empty. Hahaha.
  2. Aaeolien

    3DHS Planes Picture Thread

    You can fit a lot in a TC. I'm always amazed at what I can fit in mine. Lol.
  3. Aaeolien

    Put a face to that name!

    My son and I.
  4. Aaeolien

    3DHS Fly Low In (East) July 11,12,13,14 Washington, New Jersey 6th Annual

    I will be there this time. Looks like friends from Connecticut will be meeting me there as well. May drag my father and bring my son (will be 5 in June). Probably just going to camp but we were talking about renting a trailer for the weekend. Will see as we get closer.
  5. Aaeolien

    Happy Thanksgiving!!!!

    Happy thanksgiving man. Had a great family day and did get to fly my EPP edge and my TH slick. Got about 10 flights in total. Had a crummy landing with the edge but no damage thankfully. Flew it in probably the smallest place I've flown it yet. Field at my grandparents is completely surrounded...
  6. Aaeolien

    Discussion What's a good first balsa plane?

    Well I was leaning between the 42 slick and 3dhs 48 edge and went with the edge. Have not flown it yet but hoping Sunday afternoon after we return home from holiday travels.
  7. Aaeolien

    48" Edge 540 Building, Flying, and Questions

    It is done. :D it has not been flown yet but it's built. Got all the esc issues sorted out got the cowl mounted. Gave it a few taxi runs up and down the street out front. Just need to balance it and fly it. Probably wont happen until Sunday though. Travelling the next couple of days and not sure...
  8. Aaeolien

    50a ztw issue

    Ok crappy solder job on the bullet connector on the motor. Resoldered all of that and problem solved. Thanks guys for the help. So what I thought could have been a bum esc ended up being easily fixable once I found it. Lol.
  9. Aaeolien

    50a ztw issue

    Thanks Ryan. Resoldered battery connections and that didn't fix it. Next up pulling the motor off and resoldering all of those.
  10. Aaeolien

    50a ztw issue

    Hehe gyro I wasn't getting any beeps at all. Njswede I went ahead and resoldered the connectors on the esc and I get it to recognize that the motor is there and the throttle calibration worked. Got the tones I was supposed to get. Still haven't completely solved it but am getting closer. I...
  11. Aaeolien

    50a ztw issue

    Well very well could be me but looks like I sadly may have an issue with my esc. It'll operate the servos however I get no audible tones when I power it up even after resetting the throttle calibration a couple of times. Fully charged and balanced battery. Anyone have any ideas? On the plus...
  12. Aaeolien

    48" Edge 540 Building, Flying, and Questions

    Thanks quad. Servos all installed. Just need to wait on the arms to get here. Only using a dx6i at the moment hoping Santa brings a dx7 or 8. Lol. Few things left on the build. Mount motor and cowl and put all linkages on the servos. Left off the wheel pants for now but will be putting them on...
  13. Aaeolien

    48" Edge 540 Building, Flying, and Questions

    So I'm looking at aileron servo install. The little tabs of wood with the string. I'm guessing I snap them off tie the servo wire to it and then just pull it thru? Anyway I'm getting there on the build. Elevator servo installed, rudder pull pull installed on the rudder itself. Waiting on the...
  14. Aaeolien

    Twisted Hobbys Owner's Thread!!

    Twisted hobbies planes are crack. It's laced in the foam I swear. :)
  15. Aaeolien

    First 3D balsa

    Mopar I just started assembly on the 3dhs 48 edge and it looks like its going to be a great flyer. Goes together really really easily too. It is my first balsa 3d plane.
  16. Aaeolien

    48" Edge 540 Building, Flying, and Questions

    Yah I won't be using epoxy at all. It's wedged in there pretty good so I'm just going to use the screw method of holding it in. I don't think it'll fall out no matter what.
  17. Aaeolien

    48" Edge 540 Building, Flying, and Questions

    Thanks Gary. I didn't make it very far tonight because I got home and looking thru the toolbox noticed I had zero CA. Lol. Grrrr. Lots of welders glue for the foamies but that doesn't wick into joints real well. Lol. So will have to hit up the LHS on Sunday morning and grab some. Curling tourney...
  18. Aaeolien

    The 3DRCForums -Discuss Anything Thread-

    Ok I'm ready for the weekend to officially be here. I want to go home and start some assembly on the 48 edge. :)
  19. Aaeolien

    48" Edge 540 Building, Flying, and Questions

    My edge has arrived. Pics and build log from a rookie balsa guy to come. :) hoping to start assembly later on this evening.
  20. Aaeolien

    3DHS 48" EPP Extra

    Hehe awesome photos.
Top