• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. dth7

    IMAC learning and support using flight videos

    Any of the extra 300s the Patty Wagstaff is nice and there is an EF in the Red n Black scheme that I use since it reminds me of mine. I go into the settings and adjust the throws and expo and that helps. Adjust it so you can get a descent stall, spin and snap. Also try "ribbon" on the effects...
  2. dth7

    DLE 35 RA Mods- Reed Valve, Bowman Ring, Single Post prop adapter

    GHoffman sold me the plane and he had the 30 and 40. The 35 has been added I believe to replace the 30 or both. I'd try that. I didn't have the choice and the 30 fit. It was about as technical as that.
  3. dth7

    DLE 35 RA Mods- Reed Valve, Bowman Ring, Single Post prop adapter

    I'm sure it will be fine. I had good power stock on the EF 78 extra. Now it's really good power!
  4. dth7

    DLE 35 RA Mods- Reed Valve, Bowman Ring, Single Post prop adapter

    ES 30 CF tuned pipe with a Falcon 20x7 CF prop. Running about 8400rpm. Going to try a 20x8 CF from Redwing. Real nice performance and quieter than stock muffler which I broke it in on. Did reed valve mod (sanding block flat) and added Bowman ring all prior to first start. Engine has been close...
  5. dth7

    60" Laser-EXP

    What will a 12s 3300 get you for flight time? That's my deal maker or breaker. I've been spoiled with 15 min flights!
  6. dth7

    60" Laser-EXP

    You and me and everyone else who has flown the 60! Anytime Chris!!! Your fans want a big Laser.
  7. dth7

    DLE 35 RA Mods- Reed Valve, Bowman Ring, Single Post prop adapter

    Don't know of any cans but the pipe is really nice and quiet.
  8. dth7

    60" Laser-EXP

    Jacob, really nice flow in this flight. Isn't this airframe awesome? Keep up the motivating work.
  9. dth7

    The 3DRCForums -Discuss Anything Thread-

    Question- I have a dx8 and recently adjusted tension. When setting up a new plane I noticed the left stick (rudder) was off center a few degrees? When backing off tension it appears to mechanically center. When I re tighten it is off. When I check the monitor it shows 70% in that direction...
  10. dth7

    Savox SH0255MG Digital (5 NIB, 1 used) plus an ESC and Motor- 48" setup

    No, I should edit. I put "Sold" on the motor and ESC. Sorry for the confusion. Just edited. Motor and ESC sold. Servos only.
  11. dth7

    Savox SH0255MG Digital (5 NIB, 1 used) plus an ESC and Motor- 48" setup

    *****HOLIDAY SALE PRICE REDUCED!**** All SERVOS (motor and esc sold) for $145 shipped! Make a nice offer. Happy Holidays.
  12. dth7

    Inexpensive servos is today's market

    Shouldn't you be out flying! Cody's waiting for you! Lol
  13. dth7

    The 3DRCForums -Discuss Anything Thread-

    Happy Thanksgiving to you too Hone and everyone else. Due to my wife flying today we had turkey last night (when we have to work holidays we consider it a privilege to be able bring other families together! ha, that's what we tell ourselves anyway). So, I'll be doing a little building today when...
  14. dth7

    IMAC learning and support using flight videos

    I think so if I can find a cheap pilot and panel. I have a heavily tinted canopy and don't want to by a "6s battery" ($65-70) to put in the dark to save a few points. I've flown the known a couple times and it seems fine.
  15. dth7

    The 3DRCForums -Discuss Anything Thread-

    Ya, really? Really!
  16. dth7

    IMAC learning and support using flight videos

    Last night my 71/2 year old girl came into the office, walked over and picked up my stick plane and my Sportsman sequence written on a card and began "Aresti dancing" her way through it with no prompting or urging from me! This turned into a sim session on the wide screen with her calling the...
  17. dth7

    IMAC learning and support using flight videos

    Thanks Bill, welcome aboard. Great to have you here with your experience. I'm still fresh to IMAC and judging so your seasoned tips will be a great addition to this growing thread. This group is passionate about flying and they "get it" that Extreme Aerobatics (XA) and 3D rooted in precision...
  18. dth7

    IMAC learning and support using flight videos

    I just finished a little practice session on RF 6.5 and have found a tip that may help people. I was looking for a better way to check lines and pulls (radii). I took out most of the terrain effects, added "trails" which leaves wingtip trails during the entire flight. With wind or without...
  19. dth7

    6S LiPos, Glacier and Gens Ace

    Sorry for the confusion quad. Inter forum communication! Are we good to go?
Top