• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Bushwacker

    esc for 70" extra

    All it took to correct my problem was a amplified wire. Problem solved. Signal was too weak from the ESC to the RX. Humm thought I posted about this. Well at any rate there it is my fix. :banana: :veryshocked: :flyer: Now my Vyper runs like a RAPED APE :flyer: :veryshocked:
  2. Bushwacker

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    Well Bloosee looks like I got lucky bro. Dry fitted an old Xoar 18x8 prop with an Elite spinner and all is good to go. Got some aircraft aluminum 5/8 round stock so I'll be machining that down to make my motor stands and I'll be done.
  3. Bushwacker

    The 3DRCForums -Discuss Anything Thread-

    That is a very cool way to send them. "NICE". You both are on point with you comments totally agree.
  4. Bushwacker

    The 3DRCForums -Discuss Anything Thread-

    Where are they located bud?
  5. Bushwacker

    The 3DRCForums -Discuss Anything Thread-

    So check this out. I went to order a couple of props from this place called Chief Aircraft Xoar 19x10 and a 20x8 total cost about $38/39 bucks. Now keep in mind these guys are up the road from me in my own state a couple hundred miles away. To ship USPS mail cost almost $20 are you freaking...
  6. Bushwacker

    Perfered RX from Spectrum

    Well said and I would have to agree with ya.
  7. Bushwacker

    Perfered RX from Spectrum

    Well one thing I think stands out...The cortex comes ready to go...No setup really needed out of box, but can fine tune it or whatever you want. The rest you are probably right. I keep hearing the cortex is pretty invisible and you don't know it's there until you turn it off. Vbar takes some...
  8. Bushwacker

    Perfered RX from Spectrum

    Nicely done Jake. I will keep my eyes and ears on this stuff for sure. Man if you could get your hands on a Cortex and did a review between the two units, that would be nice. Only you would have to be able to do it honestly and objectively. Would you be able to do that? Be open minded enough to...
  9. Bushwacker

    esc for 70" extra

    It's all good brother. Remember we already discussed the different options for my motor. My final decision was a Mezon 90. I was going to do the 130 HV, but after talking with Ken he assured me the the 90 would be enough. Said I will probably only be pulling about 77 amps or so.
  10. Bushwacker

    Perfered RX from Spectrum

    Its all good info bro. I take it all in...thanks for that. :) Keep it coming.
  11. Bushwacker

    Perfered RX from Spectrum

    Cool man let me know how it goes and post up a link to the video will ya?
  12. Bushwacker

    esc for 70" extra

    Yes I know about the problem your talking about, I have been through it myself. Dude said he has Hacker A60-6XS V2, I haven't read about or know about any problems between ZTW and Hacker motors. Certainly don't want to send the guy down the wrong path though.
  13. Bushwacker

    esc for 70" extra

    ZTW Gecko. or and I know it's a CC but it is different "Talon HV 120"
  14. Bushwacker

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    Coolness...So is it a 3"?
  15. Bushwacker

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    Quick question. Is that a 76mm carbon fiber spinner and where do I get one? Edit: Nevermind I think I found it. HERE RIGHT? Edit Again: I think maybe that is not the right place. Bolt pattern is wrong and I have no mounting hole in the shaft. Unless this is not a 3" spinner. Is it maybe a 2.75"
  16. Bushwacker

    Perfered RX from Spectrum

    Exactly Right...Your right on with what Im doing...Or should I say we are doing to the same thing. LOL :)
  17. Bushwacker

    esc for 70" extra

    Mezon 90's are great.
  18. Bushwacker

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    Good to know. Although Im running the DM-4320 with a Xoar 17x10/18x8 and a EF Elite spinner on my 3DHS 65" Vyper. All fits really nice. Hopefully I won't have this trouble with this larger motor.
  19. Bushwacker

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    Oh dis is berry nice...Ken has done it again. :tongue:
  20. Bushwacker

    Perfered RX from Spectrum

    I have used Vbar before great unit. I thinned out my Heli Hanger and am now down to 2 Align Helis which are much more affordable than there competition if I break something and with the right upgrades like KDE they will hang with the best of them. My 700 runs a AR7200BX and it's solid as a rock...
Top