• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. AKNick

    Scale Sig 1/3 Scale Spacewalker

    Always like seeing visual progress like this! Keep it up!
  2. AKNick

    110" TIMBER Assembly Thread

    Not much time to play with the Timber rebuild, but I did manage to install the gear again. Treated the rubber after a nice soapy bath. I previously had poked a vent line hole in the lower fuselage, this time I turned on the laser cutter and made a ring retainer.
  3. AKNick

    70cc FLEX Ultimate assembly thread.

    You guys are getting technical, I like it. Why no less than 2x 3500? I’d rather use lighter packs and switch them out more frequently (couple flights). Do they just maintain a higher voltage longer? The fit on those wings… sheesh. My 120” Turbobushmaster needed some sanding with the wing tube...
  4. AKNick

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Slight eek moment for sure!
  5. AKNick

    110" TIMBER Assembly Thread

    Can’t believe I’ve pulled through and made this happen. Fuselage covering is done! The next big item to tackle is the broken rudder.
  6. AKNick

    110" TIMBER Assembly Thread

    Look in the tunnel. This pic is with the plane upside down.
  7. AKNick

    110" TIMBER Assembly Thread

    Thanks Mike!! Did some final sanding and made a couple more access holes for hardware. The fuselage is ready to cover again!
  8. AKNick

    110" TIMBER Assembly Thread

    Holy progress Batman. Found that ambition and a nice groove and this bad boy is getting much closer to getting repaired.
  9. AKNick

    70cc FLEX Ultimate assembly thread.

    This design concept I have done many times. What are the dimensions? https://www.thingiverse.com/thing:5793827 https://www.thingiverse.com/thing:6444898 https://www.thingiverse.com/thing:4504315
  10. AKNick

    110" TIMBER Assembly Thread

    this pic I’m pointing at three of the four blind nuts Ok, time for bed. Made some good progress. About ready to start sheeting it again.
  11. AKNick

    110" TIMBER Assembly Thread

    Here’s another pic of the landing gear aluminum support block. Decided now is the best time to change out those whimsy 3mm T nuts to some HD ones like in the wing. Heated it up with a soldering iron to soften the glue and put it came with a little pressure. Had some expired 5103 adhesive...
  12. AKNick

    110" TIMBER Assembly Thread

    Dude it's like 40F and all the snow is gone here! The two aluminum 90deg brackets that's attached inside either side of the tunnel has about four 3mm bolts each that are screwed from the inside of the tunnel to the fuselage frames T-nuts. the second photo you can see my allen wrench and the...
  13. AKNick

    110" TIMBER Assembly Thread

    Been staring at my poor timber… decided to take it down and start poking away at it. Found out that I was missing over half the 3mm bolts holding my landing gear aluminum support block in! That’s nuts. I think because it was loose is why it got so damaged from my soft tree landing. Overall it’s...
  14. AKNick

    Top Flite RTC Giant Scale P40/Roto 85 FSI

    very nice work! I keep thinking about doing this to my TFP40
  15. AKNick

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Tell me about the air valves on the plug you installed.
  16. AKNick

    70cc FLEX Ultimate assembly thread.

    I'd put a 1/4-1/2" bump in the aft air exit. You could just cover a little piece of ply and glue it to the front former there. Maybe some tri-stock if you want to get fancy. I'd be happy to draft something in CAD for you, shipping and item to Canada might be tricky.
  17. AKNick

    The 'What did you do in your workshop tonight?' thread

    Forgot to share this video from a slope soaring event I attended last May in Monterey Bay California. Kinda fun to try something different. https://forum.alofthobbies.com/index.php?threads/camp-n-fly-2024-may-4-5th.3806/page-24
  18. AKNick

    The 'What did you do in your workshop tonight?' thread

    The flying field is actually a USFS bus parking lot for the Mendenhall Glacier Visitors Center. The busses drop of the tourists and then come here to park. Some companies actually start some tours from this location. Juneau got 1.8 million tourists from May-Oct . . . the town is 35K residents...
  19. AKNick

    The 'What did you do in your workshop tonight?' thread

    Yup!
  20. AKNick

    The 'What did you do in your workshop tonight?' thread

    Put together another video. This was from 2023 footage of my Turbo Bushmaster 120”. Hoping to pump out a few videos in the near future.
Top