• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. econpatric

    Subtrim vs. Programmer for Centering Servos

    Quadracer: If I understand Joe correctly, I should adjust mechanically for the issues by measuring throws until even, as long as the servo arm is close to parallel, the "two notches" in regards to the horn spline doesn't matter (to eliminate high amounts of subtrim), as long as the arm is set to...
  2. econpatric

    Subtrim vs. Programmer for Centering Servos

    So Joe if I understand you correctly you don't use any subtrim or programming to achieve proper throws on an airplane of this size? Its all mechanical? When you get to larger airframes is it the same process? Is the above true for all control surfaces? Thanks!
  3. econpatric

    Subtrim vs. Programmer for Centering Servos

    How do I do this? Would this be beneficial on a 59" airframe?
  4. econpatric

    Subtrim vs. Programmer for Centering Servos

    Can you elaborate on this. This is similar to the comment you made on another site. I cannot seem to rap my head around it. I think that you are saying that the manufacturers make the servo pockets with a few degrees of twist to them? Please instruct your Padawan :bouncy:. This is something...
  5. econpatric

    Subtrim vs. Programmer for Centering Servos

    So, I just installed a couple of Hitec HS-5245MG's in my 3DHS 59" Slick and have been thinking about hooking them up to a Hitec servo programmer to center the arm vs. using my subtrim feature in the radio. I have always used subtrim and am now wondering if there are any benefits to either...
  6. econpatric

    Hacker A10

    Manufacturer Description The A10 motors are smalle outrunner of our series and provides great efficiency and light weight. They’re ideal for small electric airplanes up to 200g (7oz). Featuring a Slotted 12-pole outrunner design. The Curved Neodym-Magnets offer a perfect gap from the...
  7. econpatric

    Hacker A05

    Manufacturer Description Due to new technologies aircrafts and helicopters become more and more powerful. The A10 used to be our smallest high performance outrunner. The all-new design 12-pole A05 with only 7,5g is best for the new generation lightweight indoor and outdoor-models with approx...
  8. econpatric

    How many years have you been in the hobby?

    I thought it would be fun to start a poll where people could express the number of years they have been in the hobby. (By 'in the Hobby' I mean anything involving R/C aviation.) It would also be fun to hear one brief piece of general advice from each person for those starting in the hobby...
  9. econpatric

    Question? Which wattmeter

    Well I'm in. I will be making an order as soon as they are available! :banana:
  10. econpatric

    Question? Which wattmeter

    Hey TDRC, I am wondering about your watt meter... I was planning on ordering some servo extensions from you folks, and seen that you had posted this. My heart has been set on the "Watts Up" brand watt meter, but at three times the cost and from what I can tell similar features, I don't know why...
  11. econpatric

    3DHS 59" AJ Slick

    Shadow-- Nice review! In your write up here you mention turnbuckles in place of the "ez" connectors, any idea of where a person could find these in the right? I've checked, but am also not sure of total length. Any idea if the soldier on couplers PlaneCraz3d mentioned are a safe option?
  12. econpatric

    Favorite and Most Trusted RC Vendors

    Graves RC - http://www.gravesrc.com/ Aero-Works - http://www.aero-works.net/store/
  13. econpatric

    Favorite and Most Trusted RC Vendors

    How about Advantage Hobby Frank? www.advantagehobby.com
  14. econpatric

    Trex 450 V2 Pro fully loaded with extras - for newer DA-60 or NIB DLE 55.

    Just trying to figure out if there would be any interest out there? I could upload a few pictures if someone is interested. TREX 450 FB Pro V2 Airframe KDE Bling QUARK Gyro 3x 5065mg's Cyclic FUTABA 9257 on Tail 2 Extra Canopies Scorpion -8 Motor Castle Ice Lite 50 Extra Main...
  15. econpatric

    FAQ I'm new to 3D... where do I start?

    If I could offer a single piece of advice to anyone starting out it would be: Buy the best equipment you can afford when it comes to a radio system and battery charger. I started out with the DX6i and quickly found out that a 10 model memory goes quick! In addition, once I started to move into...
  16. econpatric

    Separate capacitors on receiver? To use or not to use?

    "t = -ln(V/V0)RC = -ln(3.5/6)*1*3 = 1.6s," Some great info there! NJSwede I am following the process by which you have come to the time determination. With all of that said, we are assuming that the cap is in a position to act as a small battery for protection for that 1.6s. What I wonder is...
  17. econpatric

    Separate capacitors on receiver? To use or not to use?

    Hey all, I have been doing a little digging around on whether or not to hook up a capacitor to an open channel of any of my Specktrum 6210's. There seems to be a lively debate on the legitimacy of its capabilities in the event of a brownout. I personally have not had any issues, but thought it...
  18. econpatric

    Servos for 3DHS 59" AJ Slick

    Are your servos of the old or new stock that GYRO was describing?
  19. econpatric

    Servos for 3DHS 59" AJ Slick

    I am wondering about servos for my slick. I have previously been over on RCG's and checked out the pages and pages of build threads, so I know that a person has a few choices. Being a huge Hitec guy, my question is in regards to the Hitec options. I feel like after reading many posts the...
  20. econpatric

    What do you guys want videos of?

    I'm with you on this one. I would like to see a video that spends a little more time on the technical setup of the airplane and how it affects flight performance and maneuverability, and than show the maneuver. Also, in those videos put out by "Air Age Media" with John Glenzellis, they do a...
Top