• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    AKNick, Another question, do you the spacing of the fabric screws on the aileron? I see that the Cub using the slipstream spacing on the Ailerons?
  2. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Made it back from the beach yesterday, between last night and this afternoon when out flying and finished the top of the left wing. All finish tapes are installed. Started covering the aileron. No photos of the wing since it looks the same as the bottom! I worked outside today in the...
  3. TonyHallo

    Scale Champion Model Aircraft Company??

    Good to hear, winter project?
  4. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Not sure what way I will go, tending towards not cutting the rings open. Thank you again for pointing this out, I've bought gauges from Ifly in the past. never gave them a thought. I started the top of the left wing this morning and decided to make the tool below to make the screw turning...
  5. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    That's great, just ordered 100, these have more detail than the BUSA plywood rings. Wasn't sure how many I needed but are a lot of them on this plane. 100 should cover it with a few to spare. Thank you!
  6. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    I sent Balsa USA an email several weeks ago, never heard back. I'm looking for the grommet rings provided with the 1/3 scale Super Cub kit, can't find them on their web site, maybe they do not offer them for sale. Might be a COVID 19 thing, I will call them tomorrow as well. Any other sources...
  7. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Finished installing the screws on the bottom on the wing and installed the finish tapes. It does take a little time figuring out what order to install the tapes, the lift strut fittings add to the confusion, I think I got it right. 185 screws were installed, I'm using a slotted pan head type...
  8. TonyHallo

    The 'What did you do in your workshop tonight?' thread

    Looking inside I'm surprised more of the fuselage formers didn't break when the firewall cracked? I see a lot of air when I look at the first photo above inside the fuselage.
  9. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    The service manual states a new and simplified method of attaching the covering to the ribs is used on the Champion. 3/4" tape is laid over the fabric and ribs and fastened in place with #4 screws and washers over which 2" tape is laid. I used 1/2" tape, #0 pan head screws and washers, and laid...
  10. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    The top of the wing went on well. All the fabric is attached and shrunk to 250 F.
  11. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Well I'm working in my air conditioned basement, about 62 F. It about the same as Poly Fiber, less stink.
  12. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Started putting the fabric down. Using Steward Systems Ecobond to attach the Stits lite fabric. Water based, no odor which is nice. Brush on two coats of Ecobond allowing it dry, then using an iron at 225F, iron the fabric in place. Very much the same as Stits. For the strut fittings I...
  13. TonyHallo

    Discussion The I’m Going/Went Flying Thread

    And a nicely done EDF 737. Electric foam models are taking over the flying fields, this giant scale stuff is a dying breed. I'm not ready to go electric yet, kinda funny, I spent 43 years making electricity!
  14. TonyHallo

    Discussion The I’m Going/Went Flying Thread

    Some more photos from "Wings Over Piper" A very large scale Spacewalker and Carbon Cub. A very nice Stinsion Model something or other.
  15. TonyHallo

    Scale Champion Model Aircraft Company??

    I knew I seen this plane kit before. Check the Fiberglass Specialties web site. The cowl is listed under Davey Systems/Champion in their cowls and accessories section. I would tend to believe the windshield was cut from flat plastic.
  16. TonyHallo

    Discussion The I’m Going/Went Flying Thread

    Two Hemple 40% Cubs. The L4 version powered by a DA120, the white Cub was electric. Will post a few more later, heading to the field.
  17. TonyHallo

    Discussion The I’m Going/Went Flying Thread

    Some select photos from the event. A very nicely done Cessna 140 along with a 60% Cub in the backround.
  18. TonyHallo

    Discussion The I’m Going/Went Flying Thread

    Attended 18th annual "Wings Over Piper" fun fly at the William T Piper Memorial Airport located in Lock Haven PA. It is a three day event however I could only attend on day 1 due to previous plans. It is a 3 hour drive from my home, left at 5 AM and got back at 7 PM. Here are photos of the...
  19. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    It is amazing how hard water can be!! Back to work!!! I have the wings about ready to cover, servos mounted, linkage complete, etc. I decided to use the original Steward System paint for the project and was even happier when I discovered they have the original colors available. I ordered a...
  20. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Sorry to hear about your problem as well. I did find a RC Guys Cessna 150 Aerobat at AMR RC in stock. I called RC Guys and Dan said the factory in China that made their planes closed up and the planes are no longer available. AMR had three 150's in stock. should be here on Monday. The Cessna...
Top