• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. F

    AeroWorks Free Style Extra 260- Electric Conversion

    Step 9: Final Tips To reduce the chance of a battery ejection, run the Velcro straps around the entire tray. This is much stronger since the straps now go around two glue joints. Gas planes are usually designed to just hold a gas tank, so the slots in the tray work fine. A battery, or two in...
  2. F

    AeroWorks Free Style Extra 260- Electric Conversion

    Step 8: Aileron Setup using the “Finding the true center” method The manual recommends a 1 ¼” arm for the ailerons, but I ended up using a 1” arm. I ended up with 40 degrees of aileron which is what the manual calls, but this setup will have a little bit better resolution. I also want to...
  3. F

    AeroWorks Free Style Extra 260- Electric Conversion

    Overview: Flying the AeroWorks 100cc Extra 300 in XFC this year really gave me a good insight to the quality and flight characteristics that you receive with an AeroWork’s airframe. I was someone who always thought AeroWorks built heavy airplanes, for 3D style of flying anyways. After a friend...
  4. F

    Joe Smith flying the Redwing 50cc Extra 330

    Happy Thanksgiving, everyone! Thank you all for the kind words. The setup is: Hacker q80-8m Castle ICE2 Hv160 Jeti Guidance MKS 777 Servos all around.
  5. F

    Joe "Cool Hands" Smith Working With Redwing RC

    Hey guys, I wanted to take a moment and explain a little bit more about my plans for the next year or so. The picture of me flying the Redwing 50cc Extra surfaced a few days ago and I am here to confirm that I will indeed be helping Redwing RC with airframe development. This may seem...
  6. F

    3dhs 89 slick

    108 amps 4800 Watts With falcon 24x9.
  7. F

    Servo setup: EPA, current, and linkages

    Yep. Happy to clarify. In both cases I am using the epa to get the desired throw. After this part of the setup is finished, I then use the dual rate to lower the travel to take away any binding that might be occurring because the surfaces are stiff. Now the reason I adjust the dual rates here...
  8. F

    Servo setup: EPA, current, and linkages

    #1- There are multiple devices available that can be used to check the current draw of servos. If you are looking for a plug and play type device then I would recommend either of these. I have used both and they work great...
  9. F

    Servo setup: EPA, current, and linkages

    Your process sounds great! The current they are pulling close to center should be very close to the current they are pulling at full deflection. Your's looks to agree with that, plus .18 is a very good number. I'd be happy with that.
  10. F

    Funnel hovers

    A funnel hover is basically a very tight inverted harrier turn. The simplest way to practice them and learn the proper technique would be to start practicing inverted harrier turns. As you practice, focus on making the turns tighter and tighter. You will quickly learn what inputs are required...
  11. F

    Servo setup: EPA, current, and linkages

    This would be like saying I don't need to check how many amps my foamy size eletric motor is pulling because I am driving it with a 50amp ESC. Of course the ESC would be fine in this situation, regardless of prop size. The same can be said about the 10amp CC BEC. The BEC will be fine regardless...
  12. F

    Servo setup: EPA, current, and linkages

    Definitely want to check current. It sometimes really is the "silent" killer. About the epa, they should be set to as close to max as possible. So the linkage will get moved in on the servo arm until an EPA of 140 or so gives you 45 degrees. This will help the servo out a TON, and make the...
  13. F

    Servo setup: EPA, current, and linkages

    Ah, ok. I'm not sure what a safe temp. would be and definitely don't want to make a guess. I recently read a review about these servos and the reviewer said that he "...checked the temperature after each flight, and as expected the servos were hot to the touch, and the heat quickly dissipated...
  14. F

    Servo setup: EPA, current, and linkages

    Ahh. I have been working with the guys at MKS and they recommended to me that when using a BEC the voltage should be set to 7.4 volts. Their explanation for this was that a 2s lipo doesn't remain at 8.4 volts. A 2s lipo drops down under 8 volts very quickly and will drop to 7.2-7.5 volts under...
  15. F

    60" Laser-EXP

    What voltage are you sending to these?
  16. F

    Yak 55m at Nall

    Yup. It was fixed shortly after and have had many flights since.:) Btw, it's great to see you on here, Kole! Hope all is going well for you. You're planes look great! Joe
  17. F

    92" Electric Setup

    This is true :)
  18. F

    92" Electric Setup

    Hey Matt :) 1- Hacker Q80-8M, Falcon Gas carbon 24x9, Castle ICE2 160, Futaba BLS157 servos, 2x 6s 5300mah 30c lipos, 2x 2s 1300mah RX packs. 2-Both the 87 and 92 are perfect for an electric setup. It's really about which one you like the looks of better as they both perform extremely...
  19. F

    Jeti DS-16 and Telemetry

    I shorten the positive side on the ESC and solder it in line. I use the voltage wires as well. Having the voltage telemetry keeps me from ever flying with a dead pack. The capacity meter is what I use as my timer. Joe
  20. F

    Prop advice in general

    I really wish I could be of some help with this question. We travel quite a bit, but I haven't ever flown in a high altitude environment so I have zero experience with prop sizes and such. I'm trying to think of someone I could contact that might know but no names come to mind. If I figure out...
Top