103" Extra 330SC Building, Flying, and Questions

[gyro]

I got some interesting info from one of the probro. He mention a hot blade, (the ones that you use to burn wood with) will melt the glue and then wipe it off.

I'm going to try it and find out.

Good luck!

 

[Diggity]

I got some interesting info from one of the probro. He mention a hot blade, (the ones that you use to burn wood with) will melt the glue and then wipe it off.

I'm going to try it and find out.

I would be afraid that would melt the plastic hinge. Keep us posted. If it works, I need to rehinge my 89 rudder.

 

[troylapp@hotmail]

Guys, do you know an easy and fast way to remove the glue from the joints in the airframe?

Thank you in advance.

easy and fast,,
hit the ground fairly fast, it's the fastest I've figured out..... Kindof expensive though

 

[gyro]

guys, I think Humberto was looking for advice on the glue in the balsa joints within the fuse.

diggity, I used a hot soldering iron to melt out the hinges on my 89 when I re-did them. worked fine.

 

[Brill]

Finally got a couple of flights in on the 103" last weekend, boy I really like this plane!

I really like the 4 aileron setup on the DX18QQ...super easy to setup.

103"s rule!!!

brill

 

[robj]

I got one of these ready to maiden now!

 

[gyro]

I got one of these ready to maiden now!

Good luck Rob, don't forget the video!

 

[robj]

Looks like next Saturday, I need to tidy up a few more things.

It's got the latest version of the dle111 in it. Wow twins start easy and run smooth.

The new carb on the 111 is in here..

http://www.youtube.com/watch?v=otAfnrXvV9U

 

[Cmala]

Sweet

 

[djmoose]

POPin' with some more pinstripes