Scale 35% Krill Extra 330SC....CUSTOM-ARF!!!

[ericb]

Looks great. Is Hysol the hot ticket as far as adhesive goes. I have always wanted to try it.

 

[reyn3545]

For composites..... it's great.

 

[ericb]

For composites..... it's great.

That is what I was thinking. Not so much on wood, or wood/foam planes then?

 

[Terryscustom]

That is what I was thinking. Not so much on wood, or wood/foam planes then?

Depends, there is a large variety of Hysol glues, Check 'em out: http://www.mcmaster.com/#loctite-hysol/=ujac5n

 

[ericb]

Thanks Terry.

 

[Pistolera]

9462 is a slow cure, but extremely strong epoxy. Also, you can apply it on a vertical surface or the underside of a piece...it does NOT run. I have used the mixing tubes on the end of the "gun" for a few applications, but generally just squeeze out what I need on a piece of paper, mix and apply it with a BBQ skewer.

 

[Pistolera]

Gotta have a nice instrument panel. www.iflytailies.com has some very nice stuff for scale birds. I used their 1/3 scale aerobatic plane package for the instruments, with additional radios and switches package, to go on this CF/balsa panel. BTW - that panel also adds more stiffness to the canopy shell.

 

[jglemba]

Gotta have a nice instrument panel. www.iflytailies.com has some very nice stuff for scale birds. I used their 1/3 scale aerobatic plane package for the instruments, with additional radios and switches package, to go on this CF/balsa panel. BTW - that panel also adds more stiffness to the canopy shell.

View attachment 1699

Wow! Mikey is one "Spoiled Pilot"!

 

[TazmanianDevil]

Like always, your job with the little details is brilliant.

 

[Jetpainter]

Very nice!