Scale 50% Dalotel 165

[Forgues-Research]

got the rudder number on, and the black line on top of the yellow still missing, but will get done most likely today

 

[Forgues-Research]

well I decided to remove the trim and numeral on the fin rudder, too many mistakes, and not to scale, which Ray pointed out, and he is right

 

[Pistolera]

Ooops!

 

[Forgues-Research]

Ooops!

lol ya OOPS, but that's what scale is all about

 

[TonyHallo]

Isn't that latex a bitch to sand? The fine line tape pulled the white base off this model and had to sand it all down.

 

[Forgues-Research]

Isn't that latex a bitch to sand? The fine line tape pulled the white base off this model and had to sand it all down.

Tell me about it. But its getting done 1/4" at a time lol Make sure you use the proper masking tape, I think fosgate yellow , but sure on the name...

 

[Mithrandir]

Has it flown yet!?!?!??!!?
he he he he

 

[Forgues-Research]

Has it flown yet!?!?!??!!?
he he he he

Nope, not yet, hopefully around July or August this year, at least that's the plan

 

[Forgues-Research]

OK back at the trim part, more to do but seems in a better scale position, and touch ups to be down, The reference picture you see below, was taken by Ray, with all the dimensions of the full size one. This is a life saver

 

[Forgues-Research]

One side finished , now to do very small touch ups, not a big deal, then on to finish the other side, then clear coat everything