74" Edge 540

[gyro]

Just encountered my first issue with a 3DH plane ever.

The elevators on my edge were ultracoted upside down.

I hinged them only to find that when i tried to install my control horns, the holes were on top of the elevators.:facepalm:

You must have got the first one they made after Chinese New Year, when the hangover wasn't fully worn off yet...

Are you going to slot the bottom yourself?

 

[3dbandit]

You must have got the first one they made after Chinese New Year, when the hangover wasn't fully worn off yet...

Are you going to slot the bottom yourself?

LOL.
Yes, I will slot it myself.

 

[djmoose]

Don't the slots go all the way through? like...couldn't you put the horns on either top or bottom?

Just encountered my first issue with a 3DH plane ever.

The elevators on my edge were ultracoted upside down.

I hinged them only to find that when i tried to install my control horns, the holes were on top of the elevators.:facepalm:

 

[3dbandit]

Don't the slots go all the way through? like...couldn't you put the horns on either top or bottom?

No, the slots are covered on the bottom by hardwood.

 

[gyro]

Sounds like another glitch. Mine were slotted all the way through... And I'm not sharing how I know! (But I do )

 

[Letzrock]

I am installing a motor box kit in my Edge. Do I need to sheet the inside of of the exhaust tunnel if I'm running electric?

 

[robj]

No, let the air come up and into the fuse for cooling.

 

[Letzrock]

No, let the air come up and into the fuse for cooling.

Thats what I thought but I thought i would check

 

[gyro]

She is reborn!



Motrolfly 4330-380kv
ZTW LP series 120HV Opto ESC
Xoar 20x10
Four Align DS-610 Servos (Savox SC-1258TG)
Spektrum AR8000/TM1000

and of course, a little "True Red" ultracote instead of the dark orange.

:ecstatic:

 

[joshgluck]

Looking sweet Gary

Quick question.. Any idea on how to rehinge the elevator after its installed?