AeroWorks 150cc Ultimate

[acerc]

And the wing bags have arrived, yea!!! They are sized well, padded perfectly, and have a tough exterior cover. All wings, tubes, and struts are in their place, just have to make a mount in the trailer for them. The struts bag has no handle or anything so I may put some snaps on it and the side of the wing bag with the wing tube pouch.

 

[acerc]

Graphtec sent me an email saying the latest attempt to make my gear failed to meet their expectations so they will have to try again. That means it will be another two weeks wait, minimum. I sure hope the kit one's don't give way anytime soon.

 

[Hinckley Bill]

Robert,

Thx for the update on the gear....I was just about to call them to check on any progress. Hoping they don't give up, as they're pretty much the only source that I know of for this landing gear

Bill

 

[acerc]

Robert,

Thx for the update on the gear....I was just about to call them to check on any progress. Hoping they don't give up, as they're pretty much the only source that I know of for this landing gear

Bill

She asked me what I wanted to do, I assume that mean try again or refund. Not having any other source I said carry on, I need the gear.

 

[Snoopy1]

Robert. I thought you kept your biplanes assembled and slide them into the trailer side ways, so you don’t have to assemble them them at the field.

 

[acerc]

Robert. I thought you kept your biplanes assembled and slide them into the trailer side ways, so you don’t have to assemble them them at the field.

If I can assemble it with ease in a timely fashion I will break them down. Currently the only one that is a PITA is the Eagle, it takes a good hour and a half to put together and set up. Everything else is less than 15 minutes and self aligning.

 

[dhal22]

The joys of rc. The engine won't start, forgot your transmitter, dead battery, forgot fuel, its a long list.

 

[Snoopy1]

And the wing bags have arrived, yea!!! They are sized well, padded perfectly, and have a tough exterior cover. All wings, tubes, and struts are in their place, just have to make a mount in the trailer for them. The struts bag has no handle or anything so I may put some snaps on it and the side of the wing bag with the wing tube pouch.

Who did you buy the wing bags from they look interesting. Never seen the Brand before. Do look good and does it have storage for a wing tube

 

[acerc]

Who did you buy the wing bags from they look interesting. Never seen the Brand before. Do look good and does it have storage for a wing tube

They are Revoc brand but I bought them through the US rep https://carf-models.com/en/. Yes, mine have wing tube storage as well as a pouch for the struts. They custom make the bags and will make them how ever you want them. A little pricey but in my opinion well worth it to keep the wings protected.

 

[Hinckley Bill]

They are Revoc brand but I bought them through the US rep https://carf-models.com/en/. Yes, mine have wing tube storage as well as a pouch for the struts. They custom make the bags and will make them how ever you want them. A little pricey but in my opinion well worth it to keep the wings protected.

Robert,

Did you have the option to purchase the Revoc wingbags in the red/black/yellow colors of the airframe itself?

Bill