IMAC Carden Pro 124 Build, My Dream Plane

[mndless]

Looks great Primo !! You still have a couple months to get her in the air !!!

 

[ROLLERMAN]

Here are some detail pictures from my aileron servo mount. The black flat heads are 6/32’s with blind nuts on the box. The wood screws are mainly to keep the plate from flexing under high loads.

 

[Pistolera]

Very nice Primo....looks like you did an outstanding job!

 

[ROLLERMAN]

Thanks

 

[Alky6]

Very close now, I still need to clear coat the cowl and wheel pants. I do need to add some type of stripes to the fuses sides.

What paint did you use to match the monokote Orange? Thanks!

 

[3daviator]

Looks Great!

 

[ROLLERMAN]

Thanks, 3daviator. Alky6 There is a car paint company in down town Augusta called FINISHMASTERS. I took my covering there and they were able to match the colors. They also put them in aerosol cans for me, this time I got just the base paint and clear coat it the parts later. The spray comes as if you are using a paint gun.

I have mention before I hate the painting part. but really, it has not been that bad. I was going to permanently install the inner left wing servo tonight after covering the door but I ran out of thin CA to harden the screw holes. Shame on me for running out of CA. BAD BUILDER BAD BUILDER>

 

[Joe Hunt]

Man, I just found this thread thanks to the blastmail... impressive! This does not look like your first rodeo!

 

[RJ 706]

Primo,
I have new bottles of thin and medium if you need them tonight
RJ

 

[Alky6]

Thanks, 3daviator. Alky6 There is a car paint company in down town Augusta called FINISHMASTERS. I took my covering there and they were able to match the colors. They also put them in aerosol cans for me, this time I got just the base paint and clear coat it the parts later. The spray comes as if you are using a paint gun.

I have mention before I hate the painting part. but really, it has not been that bad. I was going to permanently install the inner left wing servo tonight after covering the door but I ran out of thin CA to harden the screw holes. Shame on me for running out of CA. BAD BUILDER BAD BUILDER>

Thank you for the reply and everything is coming together amazingly well!!