Dalton 300 non MEL

[Bunky.F.Knuckle]

I'm headed down to the basement to button up the airplane, and try to figure up the CG from when I had my CSTS 157 on it, and the 157 Single spark.



Gotta finish mounting the Rx, and batteries. Mount the cowl and wheel pants. Drill the Falcon 31x10W and Mejzlik spinner at the same time.

 

[-Rick-]

I can't believe that I'm really liking that, and the graphics will make it awesome!! Did you design it for the graphics or did the graphics come later? Can't wait to see in flight pic's!



And would like to hear that motor!

 

[Bunky.F.Knuckle]

The genious mastermind if Eric Bryant at BandE Graphix. He designed it all for me!

 

[Bunky.F.Knuckle]

Got my Falcon 31x10W drilled to the Mezzy spinner. Sorry Steve (SMJ Spinners), I don't have a SMJ 5" to install on this airplane. So, I've gotta go with what I have available to me. The Mezzy spinner doesn't come pre drilled for the prop or the spinner cone mounting screws. This one turned out a tad worse than my first one. Just goes to show that you gotta take your time with things. I'm under the gun to have this ready by Thursday. But, I know for a fact that it will be done for a remaiden on Thursday.



Got a new JR RG1131BP/XG11 for this machine.

 

[Wobs]

Bunky F. Knuckle;7513 wrote: Got my Falcon 31x10W drilled to the Mezzy spinner. Sorry Steve (SMJ Spinners), I don't have a SMJ 5" to install on this airplane. So, I've gotta go with what I have available to me. The Mezzy spinner doesn't come pre drilled for the prop or the spinner cone mounting screws. This one turned out a tad worse than my first one. Just goes to show that you gotta take your time with things. I'm under the gun to have this ready by Thursday. But, I know for a fact that it will be done for a remaiden on Thursday.



Got a new JR RG1131BP/XG11 for this machine.

you don't have time to fly....you need to b coverin

 

[Bunky.F.Knuckle]

Don't have your wings yet, scooter! So, I still have time to fly!

 

[Wobs]

Bunky F. Knuckle;7644 wrote: Don't have your wings yet, scooter! So, I still have time to fly!

good point.....:fat:

 

[Bunky.F.Knuckle]

Got the fuel system finished, fuel dot installed, and mounted the cowl! Need to tweek the mounts for the wheel pants. Never fly an airplane pantless!

7747=2904-20140819_130803.jpg

7747=2905-20140819_130824.jpg

7747=2906-20140819_130928.jpg

 

[Bunky.F.Knuckle]

More pix.

7770=2915-20140819_130735.jpg

7770=2914-20140819_130740.jpg

7770=2917-20140819_130746.jpg

7770=2916-20140819_130754.jpg

7770=2913-20140819_130813.jpg

 

[Bunky.F.Knuckle]

Before anyone asks, yes, it will get painted this winter.



Just need to get it going.