Tseres
150cc
I decided to finish out the thread for the people that have been following along.
Mounted the Gear Cuffs on the 35cc Extra today. These were forgot by the factory at packing time. Herve is mailing them out to the people that have bought the planes.
I use Silicone to mount the cuffs. That way you don't have to drill into the gear. I've used this method on both the 36% and 30% Extras that I've built. It's a pretty durable way of mounting them. The Silicone turns into rubber so there is a give to it on landing or when going over a bump.
I used smoke line to cover the the edge of the cuffs that go up against the side of the fuselage. First I split one side with an Exacto knife then glued them on with medium Super Glue. I put the cuffs one at a time in place and marked the edge with a piece of masking tape. This told me where to put the Silicone once I removed the cuffs. Glob on the silicone and slip on the cuff back on and tape in place. Let dry overnight. You don't have to pull the tape tight just hold it in place while the Silicone cures. I'l show pictures tomorrow of the finished product.
Mounted the Gear Cuffs on the 35cc Extra today. These were forgot by the factory at packing time. Herve is mailing them out to the people that have bought the planes.
I use Silicone to mount the cuffs. That way you don't have to drill into the gear. I've used this method on both the 36% and 30% Extras that I've built. It's a pretty durable way of mounting them. The Silicone turns into rubber so there is a give to it on landing or when going over a bump.
I used smoke line to cover the the edge of the cuffs that go up against the side of the fuselage. First I split one side with an Exacto knife then glued them on with medium Super Glue. I put the cuffs one at a time in place and marked the edge with a piece of masking tape. This told me where to put the Silicone once I removed the cuffs. Glob on the silicone and slip on the cuff back on and tape in place. Let dry overnight. You don't have to pull the tape tight just hold it in place while the Silicone cures. I'l show pictures tomorrow of the finished product.