My 39" Crack Yak arrived last night. I just dropped it off at [MENTION=3014]AKfreak[/MENTION]'s house. He is kind enough to put it together for me since I am running short on time due to career imposed time constraints. If any of you have seen his build's, you know I am in good hands
Tom I don't think it would be inappropriate to post some pics of the parts and update us on your build progress in this thread as you go along
I went with the following hardware (I had most of it on-hand already so the choice was made by default)
Power System:
Emax BL2215/25 brushless motor
http://headsuphobby.com/Emax-BL2215-25-Outrunner-Brushless-Motor-G-186.htm
Props will be 10x4.7
30A Esc that I bought in a bulk purchase a few years ago. It performs well but I can't tell you much else about it.
3x Pulse 35c 800 mah packs. I will be using deans connectors since that is what the esc already has. If I hate it I will change to jst.
4x RCtimer D9025MG Digital Servos
http://www.aerialtechhobbies.com/el...mg-digital-metal-gear-servo-2-5kg-13g-0-09sec
Controlled by Hitec A9x and a corona mini rx.
Other building materials include Foamtac glue and blenderm tape.
Tom and I will give feedback on all the
Tom says he will bang it out in about a week... I'm not going to hold him to that, but I am very excited to fly this plane