Pitts Style Muffler

[Tseres]

Smitty,
the 61 is a great fit for the Sukhoi, I run a Mejlik 24x8 carbon and it hauls it perfectly.

You can get an Engine Sticker from B&E Graphics just like mine, that will fit your cowl opening. I get a lot of complements on it.

 

[Smitty]

I was going to do something to that effect on mine, but would hard to improve on what you did. That looks great! I will get me one of those. What size ply did you use for the baffle. 1/8 or bigger?---Smitty

 

[emtp275]

I will check that out , just like the looks of a Pitts muffler. Are you thinking I may have to do more than just adding another hole for the extra pipe.--Smitty

I am not sure havent messed with those cowls but @ChickenBalls has a larger sukhoi with a DLE 85 and pitts and it ended up cut a good bit to get over the pits.

 

[49dimes]

You can get an Engine Sticker from B&E Graphics just like mine, that will fit your cowl opening. I get a lot of complements on it.View attachment 45436

One more compliment from me! That is a really nice touch. All kinds a realistic wizardry going on up in there!

 

[Tseres]

I was going to do something to that effect on mine, but would hard to improve on what you did. That looks great! I will get me one of those. What size ply did you use for the baffle. 1/8 or bigger?---Smitty

I used 1/8 balsa. But I Fiberglassed the outside with some .75 cloth.

 

[Smitty]

Is that your choke, the yellow thing in the center looks like fuel tubing.

 

[Tseres]

Is that your choke, the yellow thing in the center looks like fuel tubing.

Yes. It's Nyrod.

 

[Smitty]

Yeah, I rig something similar to that to rig my chokes up too.---Smitty