• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

For Sale Post your extra spinners for sale here!

Bartman

Defender of the Noob!
Hey folks!

Got a few extra spinners? Need a spinner? Use this thread to put them up for sale.


The spinner below is no longer available.
I've got a 4" aluminum spinner, it has a part# stamped inside the cone and I was able to locate it online (mine is an AW72 with the solid backplate which is different from the lightened backplate in the link below)
http://www.airwildpilotshop.com/MoreInfo-1.asp?title=product&id=593

So it's an Airwild Nova, Extra style 4" 2-blade, here are a couple of pics, i used a steel insert to make it fit the engine that I had it on but the actual hole is drilled to 1/2". I can pop the insert out and use drill bits to get a more accurate bore dimension for you if you'd like.




I'm looking for a 3", 2 blade spinner. aluminum, red, or white, normal style.

Also looking for a 3.5" Extra style like the one above for a 2 blade prop, DA50
 
Last edited:

kork

70cc twin V2
Bart, is the 4" a ultimate? I am looking for one
how bout a picture?

Still looking,,,,
 
Last edited:

49dimes

Damn I'm hungry
Hey folks!

Got a few extra spinners? Need a spinner? Use this thread to put them up for sale.

I've got a 4" aluminum spinner, 2 blade, forget the brand but it's pretty heavy duty, solid backplate. I'll post a picture later tonight. Looking for a 3", 2 blade spinner. aluminum, red, or white, normal style.

Bart,

I have a Tru-Turn 3" painted Apple red. It is sloted for 120-180 (20cc-30cc) size props and I actually had a Falcon 20x8 being used with it. It has a solid backplate.
 

Attachments

  • Snapshot_20141129_1.JPG
    Snapshot_20141129_1.JPG
    33.2 KB · Views: 384

thurmma

150cc
Spinner is sold. @Bartman you can delete this post :)
 

Attachments

  • 2014-11-29 23.13.01.jpg
    2014-11-29 23.13.01.jpg
    37 KB · Views: 322
  • 20141129_224904.jpg
    20141129_224904.jpg
    114.5 KB · Views: 313
Last edited:

Bartman

Defender of the Noob!
Bart, is the 4" a ultimate? I am looking for one
how bout a picture?

Kork,
First post was updated with the info on the 4" spinner that I have available.

I didn't subscribe to the thread when I posted it so I apologize for not being through here in a few days.
Bart
 

Attachments

  • IMG_7494.JPG
    IMG_7494.JPG
    57.6 KB · Views: 342
  • IMG_7495.JPG
    IMG_7495.JPG
    62.7 KB · Views: 380
I got a couple of spinners. Will update the ad when I get home.

4.5" TruTurn 2 blade, drilled 100cc. 5" GraphTech 2 blade carbon fiber, drilled 150cc. Both need cleaned up.

4.5" spinner $65 shipped.
5" GraphTech $50 shipped.

Can get pics.

Also found a 4.5" GraphTech CF spinner. Same price as the 5". These spinners are the 3 from L to R.
 

Attachments

  • 20141227_151211.jpg
    20141227_151211.jpg
    85.3 KB · Views: 367
Last edited:

kork

70cc twin V2
Kork,
First post was updated with the info on the 4" spinner that I have available.

I didn't subscribe to the thread when I posted it so I apologize for not being through here in a few days.
Bart
Sorry Bart but I am looking for one with the stock center hole. I am looking to install on a 60
 

ExtraNuts

70cc twin V2
I have 3-4 Tru-turn 2 blade 3.5 ultimate style spinners and a couple other non ultimate's that are slight smaller.
 
Top