• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

The 3DRCForums -Discuss Anything Thread-

dth7

3DRCF Regional Ambassador
Not 3D related (but aviation related). Time lapse of the air traffic in the US over Thanksgiving. Pretty fascinating!

[video=youtube;2iEhvrI3FWI]https://www.youtube.com/watch?v=2iEhvrI3FWI[/video]

You'd be surprised how few planes we actually see when we are up at cruise looking at this. It is enlightening thou.
 

dth7

3DRCF Regional Ambassador
How do I do this? I want to tighten my dx8 up too but I'm worried I'd damaged it.

On the back behind each gimbal you'll see oval ports. If you look inside there are small Phillips screws. Next to the ports there are vertical arrows and horizontal arrows to indicate which direction you will adjust. Clockwise to stiffen the tension. Do a little and try and so on. I assume you don't have a manual. If you do it is in there. I think mine just had a bad gimbal. I have since been able to at least calibrate out the difference within a few percent. The physical offset is still there so I'm still going to send it in to HH for a refurb. Err to the conservative. Good luck.
 
Last edited by a moderator:

quadracer

100cc
I didn't know the forum was closed, so eeeexxxxccccuuuuse me. I also thought maybe my question would be relevant to others viewing it too, but I reckon it's a moot point now.
 

gyro

GSN Contributor
I didn't know the forum was closed, so eeeexxxxccccuuuuse me. I also thought maybe my question would be relevant to others viewing it too, but I reckon it's a moot point now.

no prob. have a good night! and good luck with the blue core.
 

wedoitall

Member
Well of course............but I'm sure Cody is a busy man and sometimes spread thin. The guy is like freakin Superman. Team pilot, plane designer, building communities, IMAC guru and World team and that's just the few things I know about him, im sure theres more. I just figured some of these other team pilots of companies that advertise here would chip in sometimes to help people out with GOOD quality advice
 
Top