• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

The I'm going out flying thread 2016

kwj48

kwj48

70cc twin V2
Got to go out today and burn some fuel and electrons. I got in a maiden on the Stix 60. A couple of clicks on the ailerons and it was flying great. It just needed a little engine tuning. Also starting to get into the groove with the EF 88'' edge.


.
maiden.JPG
planes.JPG
 
Luchnia

Luchnia

70cc twin V2
kwj48 said:
Got to go out today and burn some fuel and electrons. I got in a maiden on the Stix 60. A couple of clicks on the ailerons and it was flying great. It just needed a little engine tuning. Also starting to get into the groove with the EF 88'' edge.


.
View attachment 55023 View attachment 55024
Click to expand...

How is your Edge equipped?

I thought about getting an EF edge 88" to round out my hangar especially since I got all the goodies keeping the bench warm waiting for an air frame. Problem is finding a used one is like hunting down chicken teeth. I have two EF Extras, one 104" and one 88" and a 30cc off-brand Edge 540T that flies great for something cheap. I like the way the Edge flies - very stable. I can only imagine in a 50cc size and EF always!
 
yakken

yakken

100cc
Luchnia said:
How is your Edge equipped?

I thought about getting an EF edge 88" to round out my hangar especially since I got all the goodies keeping the bench warm waiting for an air frame. Problem is finding a used one is like hunting down chicken teeth. I have two EF Extras, one 104" and one 88" and a 30cc off-brand Edge 540T that flies great for something cheap. I like the way the Edge flies - very stable. I can only imagine in a 50cc size and EF always!
Click to expand...
A buddy of mine has one he is prolly going to sell. Maybe a dozen flights on it. Like brand new.
 
BalsaDust

BalsaDust

Moderator
Luchnia said:
How is your Edge equipped?

I thought about getting an EF edge 88" to round out my hangar especially since I got all the goodies keeping the bench warm waiting for an air frame. Problem is finding a used one is like hunting down chicken teeth. I have two EF Extras, one 104" and one 88" and a 30cc off-brand Edge 540T that flies great for something cheap. I like the way the Edge flies - very stable. I can only imagine in a 50cc size and EF always!
Click to expand...

I know he has a 60cc in it with a bunch of savox servos. Exact specs I'm not sure but I know watching him maiden it it has one hell of a roll rate.
 
combat chicken

combat chicken

100cc
Jetpainter said:
That was me for the last few weeks. I felt good last Saturday so I went flying. I was fine till I got home and sat down for awhile....OUCH! All better now so I'm going to go flying tomorrow and screw it up again.
Click to expand...
Sounds like all 3 of us are fighting the same problem. Been dealing with the same back issue for years. Some days I'm pretty good with just a little stiffness and some days I can't hardly move. Getting old is not for wimps! ;)
 
kwj48

kwj48

70cc twin V2
Luchnia said:
How is your Edge equipped?

I thought about getting an EF edge 88" to round out my hangar especially since I got all the goodies keeping the bench warm waiting for an air frame. Problem is finding a used one is like hunting down chicken teeth. I have two EF Extras, one 104" and one 88" and a 30cc off-brand Edge 540T that flies great for something cheap. I like the way the Edge flies - very stable. I can only imagine in a 50cc size and EF always!
Click to expand...


It has a JC60 in it for power and HV savox servos all around with the recommended arms. Can't remember which ones at the moment. Also 2 3000mah lipos with a wolverine duel switch and tech-aero bec.
 
You must log in or register to reply here.
Top