• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

The 'What did you do in your workshop tonight?' thread

49dimes

Damn I'm hungry
If this helps.........Your going to have to make some hinge knuckles out of hard wood that mate and align the holes for the wire. Slot the existing hard points to epoxy these "knuckles" in place and that they are set back a bit from the grooved pocket in the wing and stabs to get the throw you want. @stangflyer
 

stangflyer

I like 'em "BIG"!
If this helps.........Your going to have to make some hinge knuckles out of hard wood that mate and align the holes for the wire. Slot the existing hard points to epoxy these "knuckles" in place and that they are set back a bit from the grooved pocket in the wing and stabs to get the throw you want. @stangflyer
Huh???? Coloring crayons please. Seriously, I'm not picking up what you are describing.

Here are the shots of the elevator hinge line. All surfaces are like this.

20180318_110521.jpg
20180318_110531.jpg
20180318_110559.jpg
20180318_110703.jpg
20180318_110451.jpg
20180318_110514.jpg
 

Snoopy1

640cc Uber Pimp
Not much Kelly. Probably 10 to 15 degrees. Yes, the ailerons and rudder are the same. But my plan is, I will heat and pull back the covering on all the flight surfaces. Then cut the top and bottom lips off the trailing edge of all the flight surfaces. Then lay the covering back in place. Or... if someone has a better idea, please chime in. I'm not looking for perfect on this plane. I think I will build it. I am going to use it for my "safe bankrupting" down low maneuvers. Lol


The 110 can wait. There's always time for a cs dub. The DLE 55 in the box may not have any red on it, but they sure run like they do. My son's 55 now has over 450 flights after 6 years and never been broken open. All three of my previous 55's were like his. Run like a precision made clock. I suppose I could always paint the cylinder red if it will help you like it better.
View attachment 102565
Hey... ya know? That ain't a half bad idea.
View attachment 102566
Why work on it now wait till you bang it a little then open it up and work on it. It is not your master piece just a 3D trainer from what you are explaining. So minimum dollars maximum excitement. Put it together as is fly it like you stole it and you will never hit the ground.
 

Snoopy1

640cc Uber Pimp
Sorry @stangflyer i think I miss understood you I did not realize that you did not have enough throw. Looking at the pictures if I Amy suggest. Peel the covering back on the plane and sand the trailing edge flat then glue a piece of balsa on that has a bevel on one side. Then on the rudder peel the covering back and fill in the slots were the hinge pins are. Then just bevel it the hole rudder from top to baton put the covering back, done . Probably a lot easier sad than done ,but is how I see it from the pictures. Just trying to help.
 

stangflyer

I like 'em "BIG"!
Sorry @stangflyer i think I miss understood you I did not realize that you did not have enough throw. Looking at the pictures if I Amy suggest. Peel the covering back on the plane and sand the trailing edge flat then glue a piece of balsa on that has a bevel on one side. Then on the rudder peel the covering back and fill in the slots were the hinge pins are. Then just bevel it the hole rudder from top to baton put the covering back, done . Probably a lot easier sad than done ,but is how I see it from the pictures. Just trying to help.

This was actually what I had in mind. Thank you for offering that suggestion.
:way_to_go:
 

stangflyer

I like 'em "BIG"!
Playing around today. It's really nice to actually be relaxing and doing what "I" want. Instead of what I have to from week to week. So what did I do? Put my 4" White Rose wheels on the Red Bull Edge main gear...
152140604657935300298.jpg
1521406077839475964227.jpg


And everyone is entitled to at least one 3WDLE 55 once in their lifetime, right?

20180318_143844.jpg 20180318_143854.jpg 20180318_143901.jpg
20180318_143916.jpg


Also took the time to do all the mods that helps these lil guys out a bunch. Even added a Bowman ring. It may not be able to turn a "dub" sized tree trunk. But it'll still look good tick-tocking along.
double-thumbs-up-smiley-emoticon.gif
 
Last edited:

49dimes

Damn I'm hungry
Ok Rob I see your issue now and the need to remove TE material on the upper and probably lower side as well ;). You know I only look at pictures!:confused: Why you did not do that to begin with is beyond me :rolleyes: .:laughing: .

I was thinking of getting rid of the current hinge system all together and install the necessary materials to make it a genuine pocket hinge system.

Something like this.....

wingsection.gif
 

stangflyer

I like 'em "BIG"!
Ok Rob I see your issue now and the need to remove TE material on the upper and probably lower side as well ;). You know I only look at pictures!:confused: Why you did not do that to begin with is beyond me :rolleyes: .:laughing: .

I was thinking of getting rid of the current hinge system all together and install the necessary materials to make it a genuine pocket hinge system.

Something like this.....

View attachment 102581
Ok, now it makes sense. Apparently I too need pictures. Duh! Lol. Thanks Kelly... that is definitely an option.
 

49dimes

Damn I'm hungry
Playing around today. It's really nice to actually be relaxing and doing what "I" want. Instead of what I have to from week to week. So what did I do? Put my 4" White Rose wheels on the Red Bull Edge main gear...
View attachment 102574 View attachment 102575

And everyone is entitled to at least one 3WDLE 55 once in their lifetime, right?

View attachment 102576 View attachment 102577 View attachment 102578 View attachment 102579

Also took the time to do all the mods that helps these lil guys out a bunch. Even added a Bowman ring. It may not be able to turn a "dub" sized tree trunk. But it'll still look good tick-tocking along.
View attachment 102580

Had to do a "double take" on that engine ! Thought you pulled the trigger on the 55xi. Sweet! Me Likes!:yesss:
 

AKNick

640cc Uber Pimp
Same for me as Snoop... I've also been in the market for a new radio. Ever since Hitec jumped ship and sank into the deep abyss on producing a new radio system, I've been on the prowl for a new system. Two that are in the top four: Spektrum DX20 and the new Graupner MZ 32. Many I know have had or still have their DX 18's and some have gone to the 20. Not a single one is disappointed. The new Graupner shows deginate promise. Bit I'm not opposed to going back to Futaba. Don't get me wrong, I simply love my Aurora 9X. But there just simply is no possible way I can make it feasible option for the monster Stang. Not enough channels. Keep us all posted on your new radio system please.

The deciding factor for me was: felt good in my hands, I already own Futaba gear so cost effective, touch screen, a receiver with 14 channels or two eight channel rx’s, telemetry, proven, and for me has always been bullet proof. The company makes much more than RC products and can support themselves even if the distributer is having some financial issues.
What Futaba doesn’t say: resolution. I have no idea! All Futaba says is they are better than the old 1024, but spread spectrum is 2048 by theory just like Spectrum TX’s - Futaba claims they are superior but won’t list those specs to my knowledge. Even so, I feel locked in when I fly. I remember the switch from 72mHz to 2.4gHz... I flew a .46 Strega, and flew the snot out of it one morning, switched txs and flew it that afternoon... what a difference I felt then in response time. 2024 to 4096 I would think the response time would be the same, just smoother.
4096 would be sweet, like Hitec or Jeti. Can’t remember Groupners resolution, but I do remember hearing growing pains with their line of TX products which steered me away for now. Love what they are coming up with though.
The new spectrum 12 is pretty sweet, and I like their philosophy of not limiting the transmitters capabilities when utilizing an android interface. With that said, I think they are growing very fast, new products constantly, and thus you fancy new Tx gets outdated. They make nice products and listen to the RC community. But I for some reason haven’t switched.
FrySky Horus X10S I was considering, but the tap and scroll was one thing I didn’t want. Very impressive transmitter, and can switch Tx protocols between Futaba, Spectrum, and FrySki. A very large following and a underdog.
I’m learning the 18SZ, there seems to be a lot of back doors when it comes to programing that could be integrated better. Once figured some of them out it’s super quick to program. Some features that I wish it had, the 18MZ actually has at almost 2/3 the cost more. All those extra features I would consider luxury anyways. The new Spec radio has those features with the android device.
To be honest, right now I’m a little disgusted how much I spent on the 18SZ, should have waited and got the 16SZ, and saved a couple hundred. I’ll never use more than 14 channels.... I think. The flip side is I got a compatible charger and a LiFe battery with the 18SZ. You can get a life batt and Use an external charger with the 16SZ, program it to LiFe.
As far as the sticks go, really nice to adjust the tension, but overall feel seems just like my old broken it 8FG. Honestly cannot feel a difference.
I maidenned my new 18SZ with my crack yak and loved how it felt, super easy to adjust my expo and DR on he go. My first Tx with speech and vibration alerts. Way cool
96a5a8d1bf6e6b9c3b776fcaed8e761c.jpg


I’m happy with the transmitter, not disappointed with the amount of features, and love the ease of programming via touch screen.

My wife just asked what I was doing... like 30min ago and asked again just now... time to stop writing a book. HA!!! I hope someone enjoyed a delicious cup of coffee while reading this.... mine went cold


Sent from my iPhone using Tapatalk
 
Top