Thinking about getting this ready to fly

[dhal22]

Thinking about making this air worthy.

 

[pawnshopmike]

 

[-Rick-]

That will be a fun hot rod!

 

[dhal22]

I have always thought the pattern engine (OS 61 RF) on this plane wasn't the correct choice. Maybe a short stroke or the OS VF. Anyway the engine is frozen and pump may or may not be any good.

 

[dhal22]

But I have some options!

OPS Speed 60
YS 60
Jett 90

Now to compare mounting patterns, weight, headers, etc.

 

[dhal22]

The rudder control arm failed (probably soon after it was built) so i decided to finally expose the problem. Thin razor saw and away i went. Not bad actually, it should patch just fine.

 

[dhal22]

Not good, brass to steel solder joint. I cleaned it up a bit while I think about how to repair.

 

[TonyHallo]

I would give Stay Clean flux a try and Stay Brite silver bearing solder.
https://www.supplyhouse.com/Harris-...g2Lg55NeWJNu270DeuNqCoMCpigxDd78aAicYEALw_wcB

 

[dhal22]

Not much room to stick a torch inside and solder........

 

[dhal22]

Close up photo.