Ultimate Bipe Assembly

[ChickenBalls]

Yep. Old school. But I don't nearly foam 2.4 like the old 72's. Probably on the edge I won't foam any thing. Old dog can learn new tricks.

Bart I've just started trying no foam, my Sukhoi, and Herb's Escapade, no foam, velco, and zip ties, for rx, and ignition.

 

[emtp275]

I don't use any foam on my planes for the Rx, I got suggestions some where about the new stuff getting hot with no airflow but Id bet that just stems from the first Futaba Rx's but It has worked so far just velcro hell thats all they give you to mount to a new smart fly basically its a weird plastic that works the same as Velcro

 

[combat chicken]

Nope, 2.4 receivers aren't as vibration sensitive as the old receivers were. I'd suggest just a piece of velcro to secure the receiver- plenty of vibration isnulation and lets it breathe in the event you're pushing current through it.

Sounds reasonable. There is definitely less air flow in this older design ultimate in the inside. I'll dump most of the foam and go with mostly velcro.

 

[emtp275]

Sounds reasonable. There is definitely less air flow in this older design ultimate in the inside. I'll dump most of the foam and go with mostly velcro.

Wana build me a new plane? lol I recently freed up servos and a DLE 61 for something

 

[combat chicken]

Wana build me a new plane? lol I recently freed up servos and a DLE 61 for something

Uh oh. What happened!

 

[emtp275]

Uh oh. What happened!

My radio took a **** then i rushed a install and took off with reversed ailerons, leveled out but as soon as i let off the elevator she dove into the hay. Just a bad day all around

 

[combat chicken]

My radio took a **** then i rushed a install and took off with reversed ailerons, leveled out but as soon as i let off the elevator she dove into the hay. Just a bad day all around

Which bird?

 

[emtp275]

Which bird?

The 89

 

[combat chicken]

The 89

Ouch! That sucks.

 

[combat chicken]

Finally got the cowl blocks glued in. Cross hatched the area on the firewall and back of the blocks and used 15 min epoxy. Should be permanent!