Why do you use HV and / or why don't you?

[ChickenBalls]

You are very welcome! Glad to help out whenever I can

@Xpress you fitting right in as Customer service rep. for Hitec, nothing but the BEST

 

[Xpress]

@Xpress you fitting right in as Customer service rep. for Hitec, nothing but the BEST

Thanks! I am definitely starting to settle in, still learning some things, but glad to hear I'm doing well!

 

[SteelHusker]

Wow, what a tremendous thread. There are a whole lot of uber smart people on GSN, makes my head spin. Learned a ton tho, great stuff.

 

[Xpress]

Who would have known there would be so much info to learn/know about a hobby?

 

[Xpress]

If you are having a jittering/glitching issue with your Hitec 79XX servos, please contact me here on the forums first before calling in. I will redact my previous statement, this way I can better help you as we can get swamped with phone calls at times, and I will be able to advise you on the best possible method for solving your issue

Remember, I'm on here even on the weekends, so I'll be able to jump onboard and help out 7 days a week

 

[SteelHusker]

If you are having a jittering/glitching issue with your Hitec 79XX servos, please contact me here on the forums first before calling in. I will redact my previous statement, this way I can better help you as we can get swamped with phone calls at times, and I will be able to advise you on the best possible method for solving your issue

Remember, I'm on here even on the weekends, so I'll be able to jump onboard and help out 7 days a week

Hey @Xpress, I got a 7950 that makes my rudder jitter pretty bad. You think you could help me out? I appreciate your willingness to help out.

Thanks a ton.

 

[Xpress]

Send me a PM and tell me about your setup @SteelHusker

 

[stangflyer]

Maybe a little help for those that may be experiencing some servo "jitter" from Hitec 79** servos.
35% PAU Extra 300SP/Hitec HS 7954SH/HV all control surfaces.

40% SD Models Extra 260/Hitec HS 7954SH Ailerons and Elevators/HS 7980TH Rudder/HV

42% Hangar 9 Sukhoi SU26/Hitec HS 7950TH all control surfaces/HV

Other than low audible "centering sing", servos are quiet, quick, accurate and very powerful on HV setups.

Here are also a couple of ideas to help with servo jitter. I use Smart Fly Power Expanders on my large planes. I "only" point this out primarily because of all the features it allows. Plus, the SF boards also "BOOST" signal on the servo leads to help the "jitters" that some may experience.

Another little assistance item is the "Signal Boosters" that Hitec makes readily available to all Hitec servo users that may be experiencing "jitter" issues with their servos.

I was concerned with the extra long extensions I needed in the Sukhoi and possible "jitter" issues I had heard about. Not a single one used anywhere in the Sukhoi as I didn't need them.

Tanner, @Xpress can give all the particulars regarding the use of the Signal Boosters from Hitec.

Hoping this will offer a little insight and perhaps a resolution for some of you guys out there.

 

[Xpress]

Yup, those are rock solid servos. The buzzing is normal, it's just the servo keeping center with the weight of the surface pushing against it.

Like I said earlier, before you call hitec, contact me first so I can advise you on what may be up with your setup. Minimal Load Jitter will not be solved with the HS-Boost.

 

[49dimes]

Question. Why do coreless motors seem to have better torque values over brushless motors? I guess brushless advantage is only "longevity" in the motor?

Also polling responses.....What do you guys think is a better motor for HV set ups....Coreless or brushless?