Welcome To GiantScaleNews.com

GSN is the BEST in an RC online community. Less corporate BS and more down home fun. Better conversations with REAL RC'ers. Don't settle for the biggest when you can have the best!
  1. If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!



Giant Scale R/C news, forums, classifieds, event coverage, and more!

by RotorJockey : Aug 30, 2012 at 12:15 AM
Let's start with the digits off the website: Specifications Wingspan: 126" Length: 119" Wing Area: 2900 sq.in. Weight (RTF): 42-46 lbs Recommended Components Engine: Desert Aircraft DA-170 or DA-200 Servos: Hitec HS-7955TG Alternate Components Engine: DLE-222 Servos: Hitec HS-7950TG Required to Complete All...
by SnowDog : Aug 29, 2012 at 11:30 PM
Hey how about a thread for our experts in RealFlight to share their RF6 models with us so we don't have to go to KnifeEdge to get them? I thought I would make this a separate thread from the discussion thread so the models would be easier to find. TODO: Add instructions to this post detailing how to...
by djmoose : Aug 29, 2012 at 9:38 PM
Looks like I'll be the first one to post here.

I'm looking for an engine for my newly acquired 3DHS 103" Extra.

Let me know what you got.

by njswede : Aug 29, 2012 at 1:35 PM
Other than being a great plane for low and slow flying, the Sabre X features red transparent covering for the entire fuse and wings. I'm tempted to install a lighting system that takes advantage of that.

The problem is I have zero experience with lights on RC planes. I'd like to cut as little covering as...
by djmoose : Aug 29, 2012 at 1:05 PM
Manual: http://www.3dhobbyshop.com/assets/images/3DH-103EXTRA/3DH-103EXTRA-MANUAL.pdf

Wingspan: 103"
Length: 99"
Wing Area: 2100 sq.in.
Weight (RTF): 23-27 lbs.

Recommended Components
Engine: 100-111cc
Motor: Hacker A100-8
ESC: Castle Creations ICE-HV 160A
Servos: Hitec...
by RotorJockey : Aug 28, 2012 at 10:48 PM
RotorJockey here!

51 years old and fly 3D planes and helicopters!

If you ain't at least 50, GET OUTTA HERE YOU YOUNG WHIPPER-SNAPPER! :mad:

Old Farts, Sound Off!:D
by gyro : Aug 28, 2012 at 7:12 PM
This is Ben Fisher's (3DHS) advice and commentary on how to land a 3D airplane:

1. Landing is a maneuver, like any other. You are the pilot, not the passenger. The very first step to making good landings is to take responsibility for them. If you...
by Bigroger : Aug 28, 2012 at 5:41 PM
I have two Motrofly DM4315-480 motors. One in a 3dhs 57" extra and the other in my EF 60" edge.

Both are running Xoar props currently, 15x8 for the extra and 16x7 or 16x8 on the edge.

My problem is that on the two times I have had a little mishap that causes props to break, on first occasion was an inverted...
by simon737 : Aug 28, 2012 at 2:28 PM
Hi Joe,

What is your preffered smoke setup/system?

What components do you use from tank to muffler and also how do you secure everything? Tie Wraps? Safety wire?

by Steve_B : Aug 27, 2012 at 6:04 PM
It's a bit quiet over here in the PA forum so I thought I'd start a thread on the Ultimate AMR. I've had my AMR for nearly two years now it's a quirky little bipe which you will love or hate. Yeah like all bipes it's got some coupling issues and has a few little build...