Scale 112” - Taylorcraft by HeyLuc & Snoopy.

Snoopy1

640cc Uber Pimp

• Jan 27, 2024

• #141

dhal22 said:

I'm thinking new knee next winter. I've put it (both) off long enough.

Click to expand...

Age is not on your side the younger you are the better and quicker you recover.

 

dhal22

GSN Sponsor Tier 1

• Jan 27, 2024

• #142

Correct, not going to wait much longer

 

Snoopy1

640cc Uber Pimp

• Jan 31, 2024

• #143

Made it down stairs took a while but had do something. Laid out

the tail section a little to see how things look. And did some planing.

 

TonyHallo

150cc

• Jan 31, 2024

• #144

Back in the saddle!

 

Snoopy1

640cc Uber Pimp

• Jan 31, 2024

• #145

TonyHallo said:

Back in the saddle!

Click to expand...

I was back down stairs but only good for an hour laid in bed for the afternoon but it was start.

 

Snoopy1

640cc Uber Pimp

• Feb 1, 2024

• #146

Ok laid out the other side for servo and had make sure that it cleared the one on the other side. Looking good so far the rudder could be a problem but will work on that later. Not sure if the rudder servo will be in the front or tail.

 

Snoopy1

640cc Uber Pimp

• Feb 2, 2024

• #147

well having look how I am going to connect the rudder to to the stabilizer. Will have to make a filler piece and get everything to match.

 

Snoopy1

640cc Uber Pimp

• Feb 3, 2024

• #148

well the got the filler piece mad and the hinge blocks made. Just to do a little work on the surfaces and it should be good.

 

dhal22

GSN Sponsor Tier 1

• Feb 3, 2024

• #149

Looking good.

 

Snoopy1

640cc Uber Pimp

• Feb 4, 2024

• #150

made a hatch cover the top with magnets, should work and will make a second one for the rear section.