Scale 112” - Taylorcraft by HeyLuc & Snoopy.

[Snoopy1]

I'm thinking new knee next winter. I've put it (both) off long enough.

Age is not on your side the younger you are the better and quicker you recover.

 

[dhal22]

Correct, not going to wait much longer

 

[Snoopy1]

Made it down stairs took a while but had do something. Laid out

the tail section a little to see how things look. And did some planing.

 

[TonyHallo]

Back in the saddle!

 

[Snoopy1]

Back in the saddle!

I was back down stairs but only good for an hour laid in bed for the afternoon but it was start.

 

[Snoopy1]

Ok laid out the other side for servo and had make sure that it cleared the one on the other side. Looking good so far the rudder could be a problem but will work on that later. Not sure if the rudder servo will be in the front or tail.

 

[Snoopy1]

well having look how I am going to connect the rudder to to the stabilizer. Will have to make a filler piece and get everything to match.

 

[Snoopy1]

well the got the filler piece mad and the hinge blocks made. Just to do a little work on the surfaces and it should be good.

 

[dhal22]

Looking good.

 

[Snoopy1]

made a hatch cover the top with magnets, should work and will make a second one for the rear section.