Scale 112” - Taylorcraft by HeyLuc & Snoopy.
- Thread starter Snoopy1
- Start date
Snoopy1
640cc Uber Pimp
I have the same problems you are having with CA. Like the mask idea. I will look into the mask. One thing is that I live in a cold climate and do most of my building during the winter, opening windows at -10 or around their is not going to happen. But I am still going look into the mask. Thanks.
Stevendavis
100cc
Flight Vid???
Snoopy1
640cc Uber Pimp
Sorry has not flown yet. I have to clean out my garage so I can bring the plane up stairs. So I am in the process of build a shed to clean out the garage when that is all done the TC will be test flown.
Snoopy1
640cc Uber Pimp
Well this is not a good ending but it happens. Flew the plane several times and it did not get any better now matte what I did Or changed It flew bad. No directional stability at all, I could not trim the plane it was just all over the place. so did the following see picture.
Not sure that I am doing the right thing but I had to do something, so cut the tail off and going to add new and bigger tail to the plane. Hopefully the new tail will guid the plane bette if not it is going into the scrap pile.
Not sure that I am doing the right thing but I had to do something, so cut the tail off and going to add new and bigger tail to the plane. Hopefully the new tail will guid the plane bette if not it is going into the scrap pile.
Snoopy1
640cc Uber Pimp
Yes, had very tough first flight, and banged up the front end but repairable. Second flight he totalled the plane.
@TonyHallo
@TonyHallo
Snoopy1
640cc Uber Pimp
2 long days and pulled an all nighter. Got a tail section from a 100cc 3D plane and decided to see if I can blend the 2 sections into one plane. I had nothing to lopose. As you can see from the picture it is joined but not finished but a start.
@BalsaDust made some progress, will see if it works.
@BalsaDust made some progress, will see if it works.