• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Bunky.F.Knuckle

    3D Rebuilding the Compy MX2.

    Mix yourself a little D elevator/low throttle mix in. That way, she doesn't balloon on you on final. When I get my new fuse, while I have nothing in it, I'm gonna reinforce the gear plate to start with. A little 6oz cloth and finishing resin front and rear should suffice it. Of course, scuff...
  2. Bunky.F.Knuckle

    What are you going to build in 2015?

    Im not building a damn thing!! Unless a heli counts.....
  3. Bunky.F.Knuckle

    ALeeS Rush 750 EVO build thread??

    Found this when I opened up a brand new pack of main blades. Haven't heard anything back from the vendor I purchased from. But I know who I can talk to to make this right. ;) Or I'll just fix it and fly the jeepers out of them. I got started on the build last nite. It is a really straight...
  4. Bunky.F.Knuckle

    SOLD! FromeCo charger

    This is NOT a "cube" charger. This is the older multi port charger. Still works well, from my last memory. I have 4 ports installed in it of the 5. .5A and 2A charge rates. Lithium Ion batteries. $45 shipped. Pretty firm on that.
  5. Bunky.F.Knuckle

    For Sale AR9000

    DSM2 9ch Rx. Dual remote sat's. Came out of my MX2. Replaced Rx with an 11ch DMSS powersafe Rx. No problems or issues with the Rx. $70 shipped.
  6. Bunky.F.Knuckle

    For Sale Post your extra spinners for sale here!

    I got a couple of spinners. Will update the ad when I get home. 4.5" TruTurn 2 blade, drilled 100cc. 5" GraphTech 2 blade carbon fiber, drilled 150cc. Both need cleaned up. 4.5" spinner $65 shipped. 5" GraphTech $50 shipped. Can get pics. Also found a 4.5" GraphTech CF spinner. Same...
  7. Bunky.F.Knuckle

    3W-100 Looking for some advice

    Yeah, and if you send that 100 in with the DA ignition, he will have a coronary. I would try to start it regardless of how long it had been sitting. Otherwise, how will you know if something is amiss. Fuel it up, and get it primed, then look for fuel leaks around the carb throat. If it does...
  8. Bunky.F.Knuckle

    Glassing and Painting techniques

    I use a finishing resin. So it is already thin to start with. I just keep an eye on the drips until it starts tacking up.
  9. Bunky.F.Knuckle

    3D Rebuilding the Compy MX2.

    Should have my parts around the end of this month. Im building a heli this weekend, and possibly flying it too, and then I'll get back on all my rebuilds.
  10. Bunky.F.Knuckle

    Glassing and Painting techniques

    When i lay fiberglass down on say a hatch, I'll soak up the excess rein with rolled toilet paper. Roll it on the glasswork, and then unravel until you get non soaked TP. I did that with my Carden, and used a filler primer, and then base coat clear coat.
  11. Bunky.F.Knuckle

    Radio lockout

    Go for it.
  12. Bunky.F.Knuckle

    35% pilot figure - where to buy

    This is a 108" Corvus from Red Aero. ;)
  13. Bunky.F.Knuckle

    3D Rebuilding the Compy MX2.

    I couldnt either. Such a sweet flyer!
  14. Bunky.F.Knuckle

    Scale David Kocjančič Is The Worlds Greatest Scratch Builder PERIOD.

    For sure buddy!
  15. Bunky.F.Knuckle

    Scale David Kocjančič Is The Worlds Greatest Scratch Builder PERIOD.

    Very, very, very good! Incredible craftsmanship! How about some information on the engine and prop combo. Thanks!
  16. Bunky.F.Knuckle

    Radio lockout

    I've flown on each and every protocol that JR and Spektrum makes/made. DSM, DSM2, DSM-X, and now DMSS. I have seen a longer time in the DSM2 system powering up, when the Tx is within 4' of the airframe. So, I had starting holding the Tx out at arms length while I was still flying DSM2, and Rx...
  17. Bunky.F.Knuckle

    35% pilot figure - where to buy

    I've got a painter lined up. That one goes into my Corvus. Just waiting on him to get back with me.
  18. Bunky.F.Knuckle

    35% pilot figure - where to buy

    Red Aero is still in business. I talked with Tony awhile back, and he said he was having the molds worked on. Ive got 3 RARC pilots in the 35 and 40 sizes, inc 1 that is in primer. I wont sell them for 3x the price of new.
  19. Bunky.F.Knuckle

    3D CAP 232-ST design / build / prototype

    As does the BVM F-100. Its a near 200 mph airframe.
  20. Bunky.F.Knuckle

    3D Rebuilding the Compy MX2.

    Hopefully around New Years, I'll have a new fuse and cowl. Then soon after, I would hope that I have a completed airframe. Already have the canopy and wheel panties!
Top