• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Enterprise

    Twisted Hobbys - Crack Turbo BEaver

    Flew pretty good with the flaps. Crow worked as well, but I think I actually like the flaps better. Very controllable at slow speeds in a lower alpha. The wing servos might be a bit too weak so I will work on putting in beefier ones. I was trying to avoid the weight, but I think it will make...
  2. Enterprise

    Twisted Hobbys - Crack Turbo BEaver

    Just finished my quad flap modified CTB. Maiden should happen tomorrow.
  3. Enterprise

    84" Bigfoot

    I just went out and measured mine. 14 inches at the root to the end of the flap. That makes the aspect ratio of 6 to 1. This is no glider for sure.
  4. Enterprise

    84" Bigfoot

    You will need leading edge to trailing edge to get the aspect ratio. It is the ratio of the wingspan divided by the chord. http://en.wikipedia.org/wiki/Aspect_ratio_(wing)
  5. Enterprise

    Joe Nall 2014!!!!

    I am going for sure. I took the vacation week. So far I have talked my dad into bringing his Class A Winnebago for quarters, but I am shopping for my own. Getting a new cargo trailer this spring so I will bring whatever fits. I did learn from the FLI that there is such a thing as bringing...
  6. Enterprise

    3dhs 92" edge 540 !!!

    Good to know on the cable. I will have to make sure I have plenty of Azhar's stuff on hand when I assemble my 60cc projects.
  7. Enterprise

    Dle 30

    Neither can I. Doesn't hurt to check. Trust but verify.
  8. Enterprise

    Dle 30

    Have you checked the telemetry against a optical tachometer? I have never seen it off, but this makes one do a double take.
  9. Enterprise

    Dle 30

    You have a mutant DLE-30 for sure. dth7 has my old 20x7 falcon on his DLE-35 on the ES pipe. I know it is well into the 9k range, but that is impressive.
  10. Enterprise

    3DHS 70" Velox

    My Foam Cure came in and I started the Crack Turbo Beaver. It has the opposite problem as it takes a long time to setup. With the way I build these things that works out. I have the 15cc on the other end of the bench when I have to wait on dry times. I have a new right wing for my Velox that...
  11. Enterprise

    15cc EF 60" Edge 540T-EXP Gasser

    Got the GT15 in. Pulled the evo. Here is the weight comparison. 15GX 603 grams with plug GT15 630 grams with CM6 plug The perry pump and hardware was 30 grams so we are almost dead even in the swap. Just that the OS will put more weight foreword. Since the OS ignition does not have the...
  12. Enterprise

    Discussion Choosing an air frame----frustrations!

    We have both schemes up here in numbers and the blue one is slighly easier to see because the black and white on the bottom is not as easy to see as the red and white on the blue version. Also there is still a lot of quality problems with black ultracote with the top layer peeling.
  13. Enterprise

    Extreme Flight Owners Thread

    After trying the spray can last time with my 110 yak, I would gladly take the ease of the Testors, simply because I don't have a spray booth and for something that small the brush works well.
  14. Enterprise

    3DHS 70" Velox

    I got my twisted order in and have no glue! I have plenty of Welders, but all my old foamies have that yellow dinge to them and my CY mini is pretty still as I used foam cure. I just ordered a few bottles from another supplier. None of the LHSs stock the stuff. I purposely ordered it from...
  15. Enterprise

    3DHS 70" Velox

    I ordered some of their EPP glue on the 31st and no shipping notice so I think 3DHS is still shut down. I hope my new 74 edge is done correctly. It still in the box. I have a spare cowl so hopefully one will work.
  16. Enterprise

    103" Extra 330SC Building, Flying, and Questions

    Is Knoxville in August? Looking for a event to do that month.
  17. Enterprise

    12S power systems ideas and options

    Cool. I really don't like profiles for some reason. I have been searching for airframes for my 20cc gassers and most of the good flying ones are profiles. What I would like to see is a full fuse airframe that is setup to hold 2x 6S 5000s, motorbox advanced for the electric motor, and a...
  18. Enterprise

    Extreme Flight 104 Extra

    It is certainly the best airplane I own.
  19. Enterprise

    15cc EF 60" Edge 540T-EXP Gasser

    Last time out with this model I tested a 14x6 APC prop on it and it did not reach the specs Horizon gave by over a 1000 RPM. I have decided that I have had enough with the engine not making power with the setup I have and I just ordered a O.S. GT15. I will do some pictures once I get it all...
  20. Enterprise

    Discussion Choosing an air frame----frustrations!

    Power outages is what I had to use as an excuse to get my Yamaha. It works well for events.
Top