• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. AKNick

    The 3DRCForums -Discuss Anything Thread-

    Or as I like to put it: "Planes come and they go... It's just part of the hobby"
  2. AKNick

    The 3DRCForums -Discuss Anything Thread-

    Almost had it!! Good try bud!
  3. AKNick

    Scale Top Flite P-40 Build Thread

    I made this shark mouth on my H9 P-40B? So the nose is a bit longer... not the ideal "Flying Tigers" Airframe, but I really like the version of the sharks mouth that I added. Maybe some inspiration???
  4. AKNick

    Scale Top Flite P-40 Build Thread

    Did you have a paint scheme already picked out? The P-40 is looking great Charles.
  5. AKNick

    Discussion Airframe Vibration Prevention/Deadening

    I know there is a lot of folks out there that have dealt with ways to keep a single cylinder gasser from eating an airframe. Other than the obvious (prop/spinner balancing), what methods have you used for the longevity of your airframe? I'll post a couple scenarios; 1.) Canopy hatch pins and...
  6. AKNick

    DLE 35RA Muffler bolts

    Copper RTV on the muff and bolt threads yah? Seems like that has been a easy, working, readily available alternative to nordlocks, and locktite. I think we all agreed that cleaning the bolt threads and casting threads prior to RTV, locktite, or nordlocks have been the way to go.
  7. AKNick

    DLE 35RA Muffler bolts

    Curious to see how everybody's various muffler securing methods have been working out for the DLE35RA and the stock muff. Mine hasn't come loose after about 3-4 gallons more by ditching the gasket and using Red RTV, clean bolts, and with Nordlock washers as previously mentioned.
  8. AKNick

    Best 3d starter plane

    Sounds like your thinking electric in the 40" range? People really like the Extreme Flight 48" Extra 300EXP or a 44" 3DHS Slick540/580 would be a good choice. It really depends on how forgiving of a bird you need. Something like a Multiplex Stuntmaster made of foam would be more forgiving...
  9. AKNick

    Determine CG OF An Unknown Air frame (30% TOC Extreme Yak 54)

    SD models/TOC Etreme/Aviation Models 30% Yak 54 = 6.5" back from the leading edge pg21. The e-mail address domain on the manual is TOC. http://www.troybuiltmodels.com/newsite/manuals/pdf/SD-Models_30_Yak54_Manual.pdf
  10. AKNick

    AJ Laser 230z 73" Build Thread

    I use an "idle up" on my 71 slick w/DLE35RA, 3DNater is spot on. I had the same issue, It didn't like pop-tops... Idle is around 1600-1800 and I my idle up is about 2400-2600. once again, spot on 3dNater It isn't enough rpm to effect the way you fly. Just flip the switch once lined up on the...
  11. AKNick

    Redwingrc 30cc extra prop size

    You want a prop that has a smooth transition that doesn't load up the engine. I personally think that a 20 wont spool up faster than a 19, or have the rpms that a 19 has. . . however, the 20 should produce a little more thrust at lower rpms. bla bla bla Sounds like you want a carbon prop...
  12. AKNick

    Redwingrc 30cc extra prop size

    I'm running a Vess 20A on my DLE35RA I don't remember the tach numbers, transition is ok. Happy with the result over the 20B which was just too much prop. I haven't run a carbon prop, the rock strip on my field could be devastating to a carbon prop so I'm weary of trying one. It seems that the...
  13. AKNick

    The 3DRCForums -Discuss Anything Thread-

    I thought the buttons on the radio were pretty cool too. The gamer style buttons make so much more sense than searching for switches. I do wonder why transmitter manufactures have not caught on to this idea?
  14. AKNick

    Scale Top Flite P-40 Build Thread

    Good Catch! That one can chase your tail.
  15. AKNick

    35cc build help

    I would baffle the inside of the cowling as well to keep the airflow around the cylinder head fins since the inlet already appears to be kind of small. I hate to cut a larger hole into the inlet and outlet. It's too bad most Mfgrs don't supply you with a modification to create the 3:1 cooling...
  16. AKNick

    The 3DRCForums -Discuss Anything Thread-

    Well this is a little different... https://www.youtube.com/watch?v=kG3bVH65rIw
  17. AKNick

    35cc build help

    #3 seems to be a good option. or you can make/add louvers by buying them or creating your own out of fiberglass. http://www.redwingrc.com/index.php?main_page=product_info&cPath=3_26&products_id=344
  18. AKNick

    3DHS 44" Slick 580 on 4s!!

    I like it! I have an EFlight Slick 540, but the tail isn't airfoiled like this little beast, and it's a bit smaller. Been thinking about selling it and going with a flying machine like this. Great flying Tim!
  19. AKNick

    AJ Laser 230z 73" Build Thread

    Awesome!! Can you show a pic of the failure point? Also, where is your CG and how does it feel to you? Thanks!!
  20. AKNick

    Build Log Top Flite P-40E Warhawk Gold Edition kit

    love the looks of the turtle decks with the window cut outs on these WWII planes... especially the P-40
Top