• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. AKNick

    AJ Laser 230z 73" Build Thread

    Does it seem odd that the 73" V2 has a removable rudder? I don't think the rudder has as big of a foot print compared to making it a removable elevator/horiz stab on this model... but then that adds more weight... so it's a wash I guess.
  2. AKNick

    AJ Laser 230z 73" Build Thread

    good pics, thanks! I've always liked ultracote over monocote for the same reason, ultracote is easier to work with and sticks better. Where as I think monokote is lighter. just my 2 cents.
  3. AKNick

    AJ Laser 230z 73" Build Thread

    ok Good!! @BirdStrike would you mind trying to post a picture of the parts with the removable rudder? maybe line them up where they'd go on the stab? @Casualplay I don't know why they supply anything other than 4-40... it's pretty frustrating when you'd think that the mfgr should have a pretty...
  4. AKNick

    AJ Laser 230z 73" Build Thread

    Do you have V1 or V2? The old version (V1) uses epoxy as below: V2 has a removable rudder... I am unfamiliar with this setup. Check out post #27 on this thread. Tim didn't really cover it per say the rudder, but rudder and elevator are hinged the same way. Look at his post #3 on hinging through...
  5. AKNick

    Hangar 9 Extra 300 35% flight

    Lookin good!! Nice flying with good lines too! Keep it up, your on the right track!
  6. AKNick

    AJ Laser 230z 73" Build Thread

    thanks
  7. AKNick

    AJ Laser 230z 73" Build Thread

    Good to know. Which resin (P/N) did you use from their site, I see they have quite a few.
  8. AKNick

    AJ Laser 230z 73" Build Thread

    I would leave it uncut. Just make sure you have adequate ventilation using the 3:1 rule (inlet should be a third the size of the outlet) as close as you can to get rid of any cowling pressure. The bottom line is you need to make the surrounding air as ambient as possible for the best...
  9. AKNick

    Discussion Benches and Shop Setups & Storage for Model Aircraft

    I like how it folds down for transport and storage. thanks for all the pics.
  10. AKNick

    Discussion Benches and Shop Setups & Storage for Model Aircraft

    Where did you find this stand?
  11. AKNick

    Aerobeez 38" EPP Slick 540 Build Thread!

    I did that once... Mojo 40 maiden flight, barely made a full circle back to the runway. horrible landing, but luckily for the mojo, the gear took the shock. I bent it back, reversed the ailerons, took a deep breath and flew it again. Like you said "dumb mistake"... needless to say, I always...
  12. AKNick

    Scale Top Flite P-40 Build Thread

    Your P-40 is coming together great!! I've been following this build, it's really looking like an airplane now!! Keep it up!
  13. AKNick

    Discussion Benches and Shop Setups & Storage for Model Aircraft

    gotcha
  14. AKNick

    Discussion Benches and Shop Setups & Storage for Model Aircraft

    Bench Set Up That's a good way to do it too! I wonder if I could make one like that where the intermediate supports could be disassembled for storage... Thanks Bipenut
  15. AKNick

    Discussion Benches and Shop Setups & Storage for Model Aircraft

    Perfect! I've seen some bike tables that are built to a tough/sturdy construction, I may try to make a knock off of that.
  16. AKNick

    AJ Laser 230z 73" Build Thread

    Well put, Thank you!
  17. AKNick

    Discussion Benches and Shop Setups & Storage for Model Aircraft

    I like it. That is the design I had in mind. I like that you didn't go overkill, although I figured if I was going to put one together I'd probably add 4X4 legs, beef it up, add drawers for storage, and locking castors like you just mentioned. After all if the space is going to get used up, I...
  18. AKNick

    AJ Laser 230z 73" Build Thread

    Looking at my radio I have about: 100%EP 1.5" Elevator 130%EP 1.25" Aileron 75%EP 3.0" Rudder Pull-Pull dcraft My build isn't finished yet, but it at least gets you in the ball park. 3dNater Resolution has always been a stretch for me to understand, I take it your saying that if you extend...
  19. AKNick

    Discussion Benches and Shop Setups & Storage for Model Aircraft

    I've seen quite a few custom benches over the years that people use for building & maintaining model aircraft, and some clever storage ideas. I didn't already see a discussion on this where people can share photos and ideas of what they came up with... so why not now? Personally I'd eventually...
  20. AKNick

    New Here? Introduce yourself!

    I'm the same way! My nitro birds are collecting dust now as well. +1 on the friendly environment here.
Top