Scale 50% Dalotel 165

[Forgues-Research]

Very interesting read you are doing an incredible job and seems you have all the tools and machinery to do it. Enjoyed reading it will stay in touch on the build. Nice work.

Thanks for the kind words, its a total passion . and its getting there LOL

 

[Forgues-Research]

the picture with the rx, I will be mounting here temporarily, although it will go there but camouflaged. and this is getting setup for the maiden test flight around mid to end of August. so right now a lot in the wiring to keep everything invisible, not an easy task also to start installing ignition modules, and fuel tanks

 

[Jetpainter]

OK thanks a bunch

You need quality Viton with a Durometer rating of 60A which is soft and pliable. The stuff PSP sells is correct for our application. I just got some from them last week and it's nice and flexible. McMaster Carr also sells it.

 

[Forgues-Research]

You need quality Viton with a Durometer rating of 60A which is soft and pliable. The stuff PSP sells is correct for our application. I just got some from them last week and it's nice and flexible. McMaster Carr also sells it.

Thank you, great information,

 

[Forgues-Research]

Last black trim done but will need a bit fixing, no big deal, and cut out the hole where the electrical will connect from the wing to the fuse

 

[Forgues-Research]

started to pass some wire from the front to the middle but under the spar attach, guess what I can't see a dam thing so I used one these tiny camera with a hook

 

[Forgues-Research]

rough wiring you see here will be tidied up but this is only for the two wings,

 

[TonyHallo]

Will you add any protection for the wires where they pass through the aluminum spar?

 

[Forgues-Research]

Will you add any protection for the wires where they pass through the aluminum spar?

Yes Tony for sure, I will add protection

 

[Forgues-Research]

today got the fuel lines installed through the firewall and another gromet for the electrical such as ignition wires, and two servos to be in front of the firewall, also you will notice, on the side of the airplane, its not a new spar but an adapter to be able to sit the plane done , it will have small wheels