Scale 50% Dalotel 165

[Snoopy1]

Make sure that you have the correct Viton tubing I bought some from my LHS and it look good and everything else but it failed with in 3 minutes into the flight. The tubing split and came off at the most inopportune time. Banged up the plane pretty good. It seems that I got some stuff that was not meant for us rc guys. I belive if my memory is correct the good Viton tubing came had from PSB hobbies. Please somebody correct if I am wrong.

 

[Forgues-Research]

Make sure that you have the correct Viton tubing I bought some from my LHS and it look good and everything else but it failed with in 3 minutes into the flight. The tubing split and came off at the most inopportune time. Banged up the plane pretty good. It seems that I got some stuff that was not meant for us rc guys. I belive if my memory is correct the good Viton tubing came had from PSB hobbies. Please somebody correct if I am wrong.

Ya I hear you, I am having my doubts about this one, so will have to look into some good proven stuff, thanks for the heads up

 

[pawnshopmike]

Make sure that you have the correct Viton tubing I bought some from my LHS and it look good and everything else but it failed with in 3 minutes into the flight. The tubing split and came off at the most inopportune time. Banged up the plane pretty good. It seems that I got some stuff that was not meant for us rc guys. I belive if my memory is correct the good Viton tubing came had from PSB hobbies. Please somebody correct if I am wrong.

PSP Mfg. http://www.pspmfg.com/FuelLine.html

 

[Forgues-Research]

PSP Mfg. http://www.pspmfg.com/FuelLine.html

I'm on it thanks guys

 

[TonyHallo]

I use tubing from McMaster Carr, several years old still like new. There is no equal to it. I use 5/32" brass tube with DuBro barbs.

 

[Forgues-Research]

installing the choke and throttle servos, I know not the ones I usually use but had these, and they are high voltage so its all good

 

[Forgues-Research]

choke working but had to extend the choke lever to make it more precise

 

[Forgues-Research]

sorry about earlier photos, got the wrong one but now is the one I wanted to post

 

[Forgues-Research]

a bit of time off to enjoy flying today

 

[HRRC Flyer]

Everybody needs a little time off to enjoy some flying. . . . .