Scale 50% Dalotel 165

[Forgues-Research]

using again the tiny pencil camera, I was able to look inside the carburator and get the proper direction of the servos, you got to love this camera

 

[Forgues-Research]

Back to the grind stone this morning, installed the differential brake valves from Jet Tronic

 

[Pistolera]

Cool.....Guessing they'll be linked to the rudder channel?

 

[Forgues-Research]

Cool.....Guessing they'll be linked to the rudder channel?

Yes with the rudder and down elevator, with just down then straight forward braking, without down elevator, then rudder only will control them, also a switch to cut off the brakes for take off and flying.

 

[Forgues-Research]

http://www.rcuniverse.com/magazine/article_display.cfm?article_id=412

making large models safer

 

[Forgues-Research]

working on lifting system from the shop to the carrier, not that its heavy but alone is not good,

 

[GSNadmin]

What a great build looking very good!

 

[Pistolera]

working on lifting system from the shop to the carrier, not that its heavy but alone is not good,

I need to do something for when I need to roll the Raven over on the bench. Wife helps when she's available. I tried it ONCE by myself.....fortunately didn't damage anything, but NEVER AGAIN!!!

 

[Forgues-Research]

I need to do something for when I need to roll the Raven over on the bench. Wife helps when she's available. I tried it ONCE by myself.....fortunately didn't damage anything, but NEVER AGAIN!!!

I hear you , but for me I live alone and asking neighbors is not something I like to do. I will have the same system in the trailer probably but at the field although I am getting organized to go at alone, there are tons of people who are always willing to help

 

[Forgues-Research]

Here is my setup, but not pleased the track rod is a bit small and bends making the moving part a bit touchy, so I'm off to see if I can get a bigger setup, dam I miss those foamies LOL